OMNITRON 8700-0 1X T1/E1 RJ45/RJ48 COPPER FIBER ICONVERTER ST MM 1310NM 5KM MODULE

General Information
Manufacturer	Omnitron Systems
Manufacturer Part Number	8700-0
Manufacturer Website Address	http://www.omnitron-systems.com
Brand Name	Omnitron Systems
Product Line	iConverter
Product Series	T1/E1
Product Model	8700-0-x
Product Name	iConverter T1/E1 ST Multimode 5km Plug-In Module
Package Type	Retail
Product Type	Transceiver/Media Converter
Interfaces/Ports
Total Number of Ports	2
Number of ST Ports	1
ST Port Type	Duplex
Number of RJ-48 Ports	1
Media & Performance
Media Type Supported	Optical Fiber
Media Type Supported	Twisted Pair
Fiber Mode Supported	Multi-mode
Fiber Optic Cable Wavelength	1310 nm
Maximum Distance Supported	5.01 km
Network & Communication
Carrier Supported	T-carrier/E-carrier
Network Technology	T1/E1
Physical Characteristics
Form Factor	Desktop
Form Factor	Rack-mountable
Form Factor	Wall Mountable
Form Factor	Internal
Height	2.8"
Width	0.9"
Depth	4.5"
Weight (Approximate)	8 oz
Miscellaneous
Package Contents	iConverter T1/E1 ST Multimode 5km Plug-In Module User Manual
Compatibility	iConverter 19-Module Chassis iConverter 5-Module Chassis iConverter 2-Module Chassis iConverter 1-Module Chassis
Certifications & Standards	Compliance: UL CE FCC Class A
Environmentally Friendly	Yes
Country of Origin	United States
Warranty
Limited Warranty	Lifetime

•  T1/E1 Copper RJ45/RJ48 Dual Fiber Managed Media Converter

User-selectable Local Loop-Back, Force 1's to Copper, Force 1's to Fiber, and Fiber Test modes
iConverter T1/E1 model is a multimode dual-fiber option. The RJ45/RJ48 port supports T1 and E1, and a DCE/DTE switch eliminates the need for a crossover cable and facilitates connectivity to devices such as PBXs and CSUs.

The iConverter T1/E1 features user-selectable Local Loop-Back, Force 1’s to Copper, Force 1’s to Fiber, and Fiber Optic Test modes to facilitate quick fault detection, isolation, and reporting.

The iConverter T1/E1 module is hot swappable and can be mounted in a 19-Module (2U, 3.5 inch high) or 5-Module (1U, 1.75 inch high) rack-mountable chassis (19-inch or 23-inch) with any combination of redundant AC and 48VDC power supplies. It can also be mounted in a 2-Module AC or 48VDC powered chassis or in a 1-Module AC powered chassis.


Management is accomplished by using a Network Management Module (NMM) that can be accessed via Telnet using the serial port through Omnitron’s NetOutlook SNMP-based management software or any other SNMP software. The management provides real-time port and module information, remote parameter configuration and trap notification.

Some of the real-time T1/E1 parameters that can be monitored include power, link and data receive status. Other parameters include module type and model, hardware and software revisions and serial numbers and a user defined field usable for user or location identification.

The user can override the T1/E1 module’s physical switch settings by using SNMP or Telnet to remotely configure switch-selectable parameters such as Link Propagate, Link Segment Remote Fault Detection or connection type and distance.

In addition to all standard iConverter SNMP traps such as module insertion and removal, the T1/E1 modules can generate traps on port state changes including link-up and link-down. Trap monitoring of specific events can be selectively enabled or disabled by the network administrator.

Features:
RJ45/RJ48 port with DCE/DTE switch
User-selectable Local Loop-Back, Force 1's to Copper, Force 1's to Fiber, and Fiber Test modes
User-selectable Local Loop-Back, Force 1's to Copper, Force 1's to Fiber, and Fiber Test modes
Supports AMI or B8ZS/HDB3 modes
Telnet or serial port interface module configuration
SNMP management via NetOutlookâ„¢ provides real-time port and module information, remote parameter configuration and trap notification
Modules are hot-swappable in 19-Module, a 5-Module, a 2-Module or 1-Module chassis
LED displays for immediate visual status of each port
Conforms to ANSI, AT&T, ETSI and ITU specifications
Lifetime Warranty