OMNITRON 8642-1 1000 BASE-SX LX FIBER TO FIBER ICONVERTER SC MM 850 SM 1310 12KM

General Information
Manufacturer	Omnitron Systems
Manufacturer Part Number	8642-1
Manufacturer Website Address	http://www.omnitron-systems.com
Brand Name	Omnitron Systems
Product Line	iConverter
Product Series	1000FF
Product Model	8642-1-x
Product Name	iConverter 1000FF SC Multimode 550m to SC Single-Mode 12km Plug-In Module
Package Type	Retail
Product Type	Transceiver/Media Converter
Interfaces/Ports
Total Number of Ports	2
Number of SC Ports	2
SC Port Type	Duplex
Media & Performance
Media Type Supported	Optical Fiber
Fiber Mode Supported	Multi-mode
Fiber Mode Supported	Single-mode
Fiber Optic Cable Wavelength	1310 nm
Fiber Optic Cable Wavelength	850 nm
Maximum Distance Supported	12.01 km
Network & Communication
Ethernet Technology	Gigabit Ethernet
Network Technology	1000Base-LX
Network Technology	1000Base-SX
Network Technology	1000Base-LX10
Power Description
Power Consumption	1.60 W
Physical Characteristics
Form Factor	Rack-mountable
Form Factor	Internal
Form Factor	Desktop
Form Factor	Wall Mountable
Height	2.8"
Width	0.9"
Depth	4.5"
Weight (Approximate)	8 oz
Miscellaneous
Package Contents	iConverter 1000FF SC Multimode 550m to SC Single-Mode 12km Plug-In Module User Manual
Additional Information	User-selectable link fault detection modes facilitate quick fault detection, isolation and reporting. MTBF(hrs): 1,845,000 Controls: LS/LP RFD
Compatibility	iConverter 19-Module Chassis iConverter 5-Module Chassis iConverter 2-Module Chassis iConverter 1-Module Chassis
Certifications & Standards	Compliance: UL CE FCC Class A IEEE 802.3z 1000BASE-X
Environmentally Friendly	Yes
Country of Origin	United States
Warranty
Limited Warranty	Lifetime

•  1000BASE-SX MM 220m to 1000BASE-LX SM 12km Managed Media Converter

User-selectable link fault detection modes facilitate quick fault detection, isolation, and reporting
The iConverter 1000FF manageable media converter is a member of the modular iConverter product family. It provides single-mode to multimode fiber conversion and is a cost-effective solution to extending network distances by connecting multimode fiber network devices over single-mode fiber cabling.

The single-mode fiber port supports SC connectors and distances up to 12km. The multimode fiber port supports SC connectors and distances up to 220m.

The 1000FF features user-selectable Link Propagate, Link Segment and Remote Fault Detection modes to facilitate quick fault detection, isolation, and reporting.

The iConverter 1000FF modules are hot swappable and can be mounted in a 19-Module (2U, 3.5 inch high) or 5-Module (1U, 1.75 inch high) rack-mountable chassis (19-inch or 23-inch) with any combination of redundant AC and 48VDC power supplies. They can also be mounted in a 2-Module AC or 48VDC powered chassis or in a 1-Module AC powered chassis.

The iConverter is an In-Band or Out-of-Band SNMP-managed media converter. Supporting Gigabit Ethernet technologies, the iConverter family is suitable for LAN and MAN networks where copper to fiber, multimode fiber to single-mode fiber, or dual fiber to single-fiber conversions are required.

Management is achieved by using a Network Management Module (NMM) that can be accessed via Telnet using the serial port through Omnitron’s NetOutlook SNMP-based management software or any other SNMP software. The management provides real-time port and module information, remote parameter configuration and trap notification.

Some of the real-time 1000FF parameters that can be monitored include power, link and data receive status. Other parameters include module type and model, hardware and software revisions and serial numbers and a user defined field usable for user or location identification.

The user can override the 1000FF module’s physical switch settings by using SNMP or Telnet to remotely configure switch-selectable parameters such as Link Propagate, Link Segment or Remote Fault Detection.

In addition to all standard iConverter SNMP traps such as module insertion and removal, the 1000FF modules can generate traps on port state changes including link-up and link-down. Trap monitoring of specific events can be selectively enabled or disabled by the network administrator.

Features:
1000BASE-SX or 1000BASE-LX Single-Mode (SM) to Multimode (MM) Fiber converter
Supports multimode, single-mode, and single-fiber with SC connectors
Supports distances up to 12km
User-selectable link fault detection modes facilitate quick fault detection, isolation, and reporting
Telnet or serial port interface module configuration
SNMP management via NetOutlookâ„¢ provides real-time port and module information, remote parameter configuration and trap notification
Modules are hot-swappable in 19-Module, a 5-Module, a 2-Module or 1-Module chassis
LED displays for immediate visual status of each port
Conforms to IEEE 802.3, 1000BASE-SX and 1000BASE-LX specifications
Lifetime Warranty