SMART500RT1U Tripp Lite SmartPro 500VA Rack/Tower UPS

The SmartPro® line-interactive SMART500RT1U UPS system with AVR protection provides reliable battery backup and AC power protection against blackouts, brownouts, surges and line noise that can damage valuable electronics or destroy data. The 120V battery backup is ideal protection for point-of-sale and kiosk applications, a small business VoIP network, or rack-mount equipment in your server room or network closet.

Allows Time to Back Up Critical Files During a Blackout

Backup support allows you to work through short power failures and gives you enough time to safely save files and shut down your system in case of a prolonged blackout. Backup time varies according to load, but the line-interactive UPS system should keep a half load (150W) powered as long as 14 minutes and a full load (300W) up to three minutes.

6 NEMA Outlets Protect Your Connected Components

Six 5-15R outlets provide battery backup, 567 joules of network-grade surge protection and voltage regulation for your crucial components. Five outlets are UPS-supported, and one is surge-only to connect peripherals not requiring battery backup. One UPS-supported outlet is switchable, allowing you to power its connected device on and off remotely to reset or reboot it or to shed a less significant load to extend battery runtime for more critical equipment.

Automatic Voltage Regulation (AVR) Corrects Low-Voltage Conditions

AVR protects your equipment from incremental hardware damage, data loss and performance problems caused by brownouts. The SMART500RT1U maintains regulated 120V nominal output during brownouts as low as 90V, while keeping the battery fully charged and ready to take over in case of power failure. The fast-to-recharge internal batteries are field-replaceable and hot-swappable.

Optional WEBCARDLXE Network Interface Offers 24/7 Access

An accessory slot accommodates the optional Java-free HTML5-based WEBCARDLXE interface (sold separately), which enables full remote access for site power and UPS status monitoring, configuration, control and email notifications via secure web browser, SNMP, telnet or SSH. It supports 10/100 Mbps auto-sensing for optimal communication with an Ethernet network. Automated alerts help prevent accidental overloads, power loss and downtime.

Premium Protection from EMI/RFI Line Noise Helps Your Equipment Perform Better

This UPS system filters out disruptive electromagnetic and radio frequency interference that can inflict hardware damage or data loss. This EMI/RFI filtering also helps your connected components perform better and last longer.

Designed for High Efficiency to Help You Save Money and Protect the Environment

A 97% efficiency rating reduces BTU emissions, energy consumption and, ultimately, your energy costs.

LED Indicators and Audible Alarms Keep You Informed

Five front-panel LEDs keep you apprised of line power, battery power, overload, voltage regulation and battery low/replace status at a glance. A multi-function alarm sounds to warn you of power failure, overload and low-battery conditions.

More from the Manufacturer

MODEL- SMART500RT1U       VENDOR- TRIPPLITE
 
FEATURES- SmartPro Rack/Tower UPS System- Black finish
       Intelligent, line-interactive network power management system.
       500VA line interactive 1U rack/tower UPS system; 6 outlets with 1 
        switchable load bank; Simultaneous communications via SNMPWEBCARD 
        slot, USB and DB9 serial ports; Included PowerAlert UPS monitoring 
        software manages an unlimited number of network UPS systems; 
        Built-in voltage regulation corrects brownouts to 90V; $250,000 
        Ultimate Lifetime Insurance (USA & Canada only).
       Tripp Lite's SMART500RT1U intelligent, line interactive rack/tower 
        uninterruptible power supply prevents data loss, downtime and 
        equipment damage due to power outages, voltage fluctuations and 
        transient surges.
       Requires only one rack space (1U) in a 2 or 4 post rack, with 
        included accessories for upright tower placement. Large internal 
        batteries offer 17 minutes half load runtime and 5 minutes at full 
        load. Maintains regulated 120V nominal output without using battery 
        power during brownouts as low as 90V. 500VA/300 watt power handling
        capability is compatible with networking, telecom and other 
        sensitive electronic applications. 
       Includes a total of 6 outputs with a single pair of outlets that can 
        be individually controlled via software interface to reboot select 
        equipment on demand or automatically shed less significant loads to 
        extend battery runtime for more critical equipment. Supports 
        simultaneous remote monitoring of UPS and site power conditions via 
        built-in USB and DB9 monitoring ports. Includes PowerAlert UPS 
        monitoring and unattended shutdown software with complete cabling. 
       Built-in accessory slot supports SNMP with optional SNMPWEBCARD 
        adapter. Emergency Power Off (EPO) interface offers option for 
        instantaneous power-off of UPS and connected equipment in the case 
        of fire or emergency situation. Multi-function audible alarms and 
        set of 5 front panel LEDs offer at-a-glance notification of UPS and 
        line power status. Network-grade AC surge suppression protects 
        equipment from damage and performance problems resulting from 
        transient surges and line noise. Attractive all-black color scheme.
       Find the TrippLite UPS appropriate for your needs. Try the TrippLite UPS Sizing Guide Today.
   Includes SMART500RT1U UPS System, Mounting hardware, Cabling for USB & 
     DB9 monitoring and EPO switching, PowerAlert unattended shutdown and 
     UPS/Power monitoring software, Warranty information and instruction 
     manual.
* SMART500RT1U line interactive UPS offers battery derived sine wave AC 
  output during power outages, voltage regulation during brownouts, plus 
  network-grade AC surge suppression.
* 500VA/300 watt power handling capability compatibile with networking, 
  telecom and other sensitive electronic devices.
* Supports 1U rackmount installation in 2 or 4 post rack enclosures, 
  upright tower placement also supported - mounting accessories included.
* Large internal batteries offer runtimes of 17 minutes at half load
  (250VA/150 watts) and 5 minutes at full load (500VA/300 watts).
* Maintains regulated 120V nominal output during brownouts as low as 90V.
* Includes 6 UPS-supported outlets, with one pair of individually 
  controllable outlets that can be powered off and back on again via 
  software interface.
* PowerAlert UPS monitoring and unattended shutdown software enables 
  configurable network broadcast messaging, pager & email notification, 
  event logging and running user-defined script commands.
* Offers simultaneous monitoring by up to 3 directly-connected devices 
  through included USB, DB9 and SNMP* interfaces (*requires optional 
  SNMPWEBCARD), or the monitoring of any number of additional UPS systems 
  over IP with included PowerAlert monitoring software. Free PowerAlert 
  enterprise management software is also available for select 
  opportunities.
* Communications ports support messaging of UPS and line power status, 
  including on-battery, low-battery, power restored, AC line voltage, DC 
  battery voltage and remaining battery capacity.
* Supports timed inverter shutoff after unattended shutdown, activate self-
  test and UPS output power control for scheduled or immediate reboot of 
  connected devices.
* Supports Tripp Lite's WatchDog software application to restore 
  unresponsive programs by systematically restarting applications, 
  operating systems and ultimately rebooting completely locked computers by 
  momentarily switching UPS power off and back on again (requires optional 
  WATCHDOGSW).
* Built-in accessory slot supports SNMP with optional SNMPWEBCARD adapter.
* Emergency Power Off (EPO) interface with cable.
* Multi-function audible alarms and set of 5 front panel LEDs.
* Network-grade AC surge suppression.
* Attractive all-black color scheme.
* UPS battery set ships fully assembled and ready for installation, no time 
  consuming connection of internal batteries by user is necessary.
* Two year warranty with $250,000 connected equipment insurance (USA & 
  Canada only).
 
  -- SPECIFICATIONs -------------------------------------
OUTPUT- Output volt amp capacity (VA): 500
         Output watt capacity (watts): 300
               Output nominal voltage: 120V 
            Output voltage regulation: LINE MODE  : Sine wave line voltage 
                                                     120V (-15% +13%)
                                       BATTERY MODE: PWM sine wave output 
                                                      within 10% of 120V.
          Output frequency regulation: LINE MODE, Passes line frequency of 
                                        60Hz +/-10%; BATTERY MODE, Inverter 
                                        output regulated to 60Hz +/-1 Hz.
                 Outlet quantity/type: (6) NEMA 5-15R receptacles
   Custom load management receptacles: Includes 1 load bank of 2 outlets 
                                        that support automated load 
                                        shedding and remote reboot on 
                                        demand of locked network devices. 
                                       Configurable via PowerAlert software 
                                        to automatically switch off 
                                        optional loads, like monitors, to 
                                        increase available runtime for 
                                        servers and other critical devices.
                  Overload protection: Via 15A input breaker 
INPUT  - Input amps        : 5.6A
         Input connection  : NEMA 5-15P 
         Input cord length : 10 ft., 14 gauge 
         Electrical service: 15A 120V recommended
BATTERY- Full load runtime :  5 minutes (500VA) 
         Half load runtime : 17 minutes (250VA) 
         DC system voltage : 12 VDC 
   Typical battery lifespan: 3-6 years, depending on usage 
      Battery recharge rate: 2-4 hours to 90% 
             Battery Access: Allows hot swap battery replacement without 
                              powering connected equipment off.
VOLTAGE REGULATION- 
       Voltage regulation  : Line interactive voltage regulation system 
                              corrects brownouts as low as 90 volts back to 
                              usable 120V nominal levels.
      Brownout correction  : Input voltages between 90 and 108 are boosted 
                              by 14%.
LEDS ALARMS & SWITCHES-
  Front panel LEDs: 5 front panel LEDs - Green POWER LED, 3 color BATTERY 
                     CHARGE LED, 3 color OUTPUT LOAD LEVEL LED, red BATTERY 
                     WARNING LED.
            Alarms: Audible alarm warns of power failure, overload, UPS 
                     fault and low battery conditions.
          Switches: Includes 2 front panel mounted push-button switches for 
                     system enable, self-test and alarm cancel functions.
SURGE/NOISE SUPPRESSION-
  AC surge suppression        : 1800 joules
  AC suppression response time: Instantaneous 
  EMI/RFI AC noise suppression: Yes
COMMUNICATIONs - 
    Network monitoring port: Includes 2 built-in monitoring ports, 1 USB & 
                              1-DB9. Each supports on battery, low battery, 
                              power restored, AC line voltage, DC battery 
                              voltage, load percentage, battery charge 
                              current, battery capacity, internal UPS 
                              temperature and line frequency status 
                              messaging. Interface supports timed inverter 
                              shutoff after unattended shutdown, activate 
                              self-test and 10 second reboot of connected 
                              equipment. Supports reboot of all connected 
                              devices at once or individual load banks via 
                              software interface. Compatible with Tripp 
                              Lite's PowerAlert and WatchDog software.
       Software and cabling: Includes PowerAlert UPS monitoring software 
                              for network and standalone operating systems. 
                              Ships with complete USB and DB9 cabling.
         SNMP compatibility: Built-in accessory slot accommodates internal 
                              SNMP/Web card and other network accessories.
     WatchDog compatibility: Yes, compatible with Tripp Lite's WatchDog 
                              system service to restore operation to locked 
                              equipment through soft reboot of application/
                              OS or hard power off/on reboot of connected 
                              equipment - ideal for unattended kiosk 
                              applications.
LINE/BATTERY TRANSFER -
  Transfer time from line power to battery mode: 2-4 milliseconds 
          Low voltage transfer to battery power: 9V0 (resets to line power 
                                                  as line voltage increases 
                                                  to 94V or higher).
         High voltage transfer to battery power: 136V (resets to line power 
                                                  as line voltage decreases 
                                                  to 132V or lower).
EPO PORT   - Includes RJ11 EPO (emergency power off) port and cable.
TVSS GROUND- Includes back panel grounding point with thumbscrew for data 
              line surge suppressors and other network accessories 
              requiring a safe grounding point.
COLD START - Yes, inverter can be "cold started" to enable temporary AC 
              output during a power failure.
MATERIAL   - Steel construction
FORM FACTOR- Supports 1U rackmount and upright tower compatible.
ENVIRONMENT- Operating Temperature: +32 to +104 degrees Fahrenheit  
               Storage Temperature: +5 to +122 degrees Fahrenheit
                 Relative Humidity: 0 to 95%, non-condensing 
          Line mode BTU/hr. (Max.): 65.1 
       Battery mode BTU/hr. (Max.): 437.1 
APPROVALS  - UL1778 (USA), cUL (Canada), FCC Class B (emissions), NOM 
              (Mexico).
SIZE- 17.5"w x 1.75"h x 11.75"d          WT.- 18.8 lbs.                     
  www.tripplite.com  

Similar Products:

TRIPP LITE (SMART1500)
Tripp Lite SmartPro 1500VA UPS

$653.87