TRIPP LITE
TRIPP LITE N858-15M-3X8-MG 15M 24-FIBER MMF TRUNK CABLE BASE-8 MTP MPO OM4 40/100GBE 3XF
Mfg Part Number: N858-15M-3X8-MG , Item #: 2753045
, PO and Wire.
The 15-meter (49-foot) N858-15M-3X8-MG MTP/MPO Multimode Base-8 Trunk Cable supports 40/100 Gb Ethernet speeds and is designed for high-density connections between network equipment in telecommunication rooms and data centers.
With three female MTP/MPO connectors on each end, this OM4-rated multimode fiber optic cable is recommended for high-density fiber patching between data center MDFs (main distribution frames) and IDFs (intermediate distribution frames). It's colored magenta for instant identification as an OM4 cable. Push/pull tab connectors are easily accessible in high-density data center applications and make the cable easy to install and remove with one hand.
The 8-fiber MTP/MPO connectors are about the same size as SC connectors, but are 12 times denser, freeing up rack space for other cables. Optimized for QSFP+ 40GBASE-SR4 and QSFP28 100GBASE-SR4 networks, this cable is tested for low insertion loss and back reflection on every connector and attenuation loss that meets or exceeds current standards. The 5.6-millimeter ruggedized plenum-rated jacket and bend-insensitive fiber are perfect for connecting high-speed network components in ceilings, walls and ducts.
Features
OM4-Rated for 40/100 Gb Ethernet Applications
- Designed to extend high-density connections between network equipment in telecom rooms and data centers
- Recommended for patching between data center MDFs and IDFs
- Optimized for QSFP+ 40GBASE-SR4 and QSFP28 100GBASE-SR4 networks
- Magenta-colored for identification as an OM4 cable
MTP/MPO Connectors with Push/Pull Tabs
- 8-fiber female connectors 12 times denser than SC connectors
- Push/pull tab connectors easy to install and remove with one hand
- 100% tested for low insertion loss and back reflection
Error-Free Signal Transfer
- 50/125 duplex glass fiber construction
- Plenum-rated jacket and bend-insensitive fiber perfect for ceilings, walls and ducts
| General Information | |
| Manufacturer | Eaton Corporation |
| Manufacturer Part Number | N85815M3X8MG |
| Manufacturer Website Address | http://www.eaton.com |
| Brand Name | Tripp Lite by Eaton |
| Product Model | N858-15M-3X8-MG |
| Product Name | N858-15M-3X8-MG MTP/MPO Multimode Base-8 Trunk Cable, Magenta, 15 m |
| Product Type | Network Cable |
| Technical Information | |
| Cable Type | Fiber Optic |
| Fiber Optic Mode | Multi-mode |
| Fiber Optic Cable Core/Cladding Specification | 50/125 µm |
| Cable Length | 49.20 ft |
| Connector Type on First End | MTP/MPO Network - Female |
| Connector on First End Details | 3 x MTP/MPO Network - Female |
| Connector Type on Second End | MTP/MPO Network - Female |
| Connector on Second End Details | 3 x MTP/MPO Network - Female |
| Device Supported | Network Device |
| Data Transfer Rate | 100 Gbit/s |
| Physical Characteristics | |
| Color Family | Pink |
| Product Color | Magenta |
| Shipping Height | 3.74" |
| Shipping Width | 8.27" |
| Shipping Weight (Approximate) | 1.83 lb |
| Miscellaneous | |
| Environmentally Friendly | Yes |
| Country of Origin | China |
| Warranty | |
| Limited Warranty | Lifetime |
Modules
Patch Panels
Tripp Lite 100Gb/120Gb to 10Gb Breakout Cassette - 24-Fiber MTP/MPO to (x12) LC
Tripp Lite 40Gb to 10Gb Breakout Cassette - (x2) 12-Fiber MTP/MPO to (x12) LC
Tripp Lite High Density Copper / Fiber Cassette Sleeve, 0U, 1-Cassette Capacity
Tripp Lite 100Gb/120Gb to10Gb Breakout Cassette, 24-Fiber MTP/MPO to ( x12 ) LC Duplex
Tripp Lite 40Gb to 10Gb Breakout Cassette, (x2) 12-Fiber MTP/MPO to ( x12 ) LC Duplex
Tripp Lite 40Gb-10Gb Breakout Cassette x3 8-Fiber OM4 MTP/MPO to x12 Dup LC
WARNING:: The plastic used in cable products can expose you to lead and lead components,
chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm.
For more information go to www.P65Warnings.ca.gov
