VIKING ELECTRONICS E-1600BLT2IPEWP VoIP Two-Button Yellow Emergency Tower Phone, with High Power LED Strobe/Beacon and Voice, Surface Mount Only with Enhanced Weather Protection

ADA Compliant VoIP Emergency Tower Phones with Blue LED Beacon and Strobe Light

The E-1600-BLTIPEWP and E-1600BLT2IPEWP ADA Compliant VoIP Emergency Tower Phones are designed to provide quick and reliable handsfree communication for SIP VoIP phone systems with PoE. Both tower phones meet ADA requirements for emergency telephones, and can be programmed from any Touch Tone phone or PC on the same LAN. The phones can dial up to 5 programmable emergency numbers. In addition, the E-1600BLT2IPEWP features a second "INFO" button that will dial up to 5 non-emergency numbers.

At the simple push of a button, the E-1600-BLTIPEWP and E-1600BLT2IPEWP will initiate a call to your emergency personnel and send a digital announcement to identify the location of the emergency call. In addition, the tower phone's bright LED strobe light will instantly begin flashing to deter further activity and make it fast and easy for Police or Security personnel to locate the site of the emergency. The strobe light can also be programmed to provide a continuous-on lower intensity beacon when the emergency phone is not in use.

The E-1600-BLTIPEWP and E-1600BLT2IPEWP are equipped with Enhanced Weather Protection (EWP) for outdoor installations where the unit is exposed to precipitation or condensation. EWP products feature foam rubber gaskets and boots, sealed connections, gel-filled butt connectors, as well as urethane or thermal plastic potted circuit boards with internally sealed, field-adjustable trim pots and DIP switches for easy on-site programming.

General Information
Manufacturer	Viking Electronics, Inc
Manufacturer Part Number	E-1600BLT2IPEWP
Manufacturer Website Address	http://www.vikingelectronics.com
Brand Name	Viking Electronics
Product Model	E-1600BLT2IPEWP
Product Name	E-1600BLT2IPEWP Emergency Phone Tower
Product Type	Emergency Phone Tower
Physical Characteristics
Product Color	Yellow
Miscellaneous
Additional Information	Self diagnostic reports via email (testing com, mic, speaker & switch) Automatic polling and programming software included SIP compatible (see pg 2 for list of compatible IP-PBX phone systems) PoE powered (class 1, <4 watts) Automatic Noise Canceling (ANC) feature for proper operation in noisy environments VoIP eliminates the need for "Push to Talk" mode Network downloadable firmware Meets ADA requirements for Emergency Phones: - Automatically lights the "Call Connected" LED - Transmits a location I.D. or voice announcement - Grade 2 Braille label for the visually impaired Non-volatile digital voice announcer with 28 seconds of voice memory Handsfree operation Marine grade 316 stainless steel prevents faceplate / push button corrosion Dials up to 5 emergency numbers E-1600BLT2IPEWP dials up to 5 additional non-emergency "INFO" numbers Cycles through backup phone numbers on busy or no-answer Comes standard with Enhanced Weather Protection (EWP), EWP products are designed to meet IP66 Ingress Protection Rating, see DOD# 859 Hangs up on busy signal, time-out or touch tone command Remotely programmable Extended temperature range (-40°F to 140°F) Optional PB-100 Polling System available (DOD# 232) Power: PoE class 1 (<4 watts) Operating Temperature: -40° C to 60° C (-40°F to 140°F) Humidity - Standard Products: 5% to 95% non-condensing Humidity - EWP Products: Up to 100% Audio Codecs: G711u, G711a, G722 Network Compliance: IEEE 802.3 af PoE, SIP 2.0 RFC3261, 100BASE-TX with auto cross over Connections: (1) RJ45 10/100 Base-T, (3) gel-filled butt connectors
Application/Usage	Parking Lot
Certifications & Standards	ADA
Warranty
Limited Warranty	2 Year