COMNET FVT10D1A2C1M1 (1) 10-bit Digitally Encoded Short-Haul Video + (1) Bi-Directional Data + (2) Bi-Directional Audio + (1) Bi-Directional Contact Closure Transmitter, mm, 1 fiber

The ComNet™ FVT/FVR10D1A2C1 video transmitter/data transceiver and video receiver/data transceiver series utilize 10-bit digital encoding and decoding for highquality video transmission that meets the requirements of EIA RS-250C for short-haul video transmission. These environmentally hardened units provide transmission of one independent video channel and one bi-directional data channel over one optical fiber and are ideal for use in unconditioned roadside or out-of-plant installations. They also provide transmission of two bi-directional audio signals and one bi-directional contact closure over the same fiber. The modules use 24-bit 96kHz sample rate digital encoding for superior transmission of balanced line-level audio. It also supports "up-the-coax" data transmission from all major manufacturers. Plug-and-play design ensures ease of installation and no electrical or optical adjustments are ever required.

FEATURES

• 10-bit digital video transmission: transmits one real-time color video signal and one bi-directional data signal on one optical fiber
• Supports RS232, RS422, and 2 or 4-wire RS485 with tri-state data interfaces
• Two bi-directional Audio Channels
• One bi-directional Contact Closure
• 24-Bit 96kHz Digitally Encoded Transmission
• 20Hz - 18 kHz Audio Bandwidth
• 600 Ohms Audio Input Impedence
• Transmits Balanced Line-Level Audio up to +6dBm
• Exceeds all requirements for EIA RS-250C short-haul transmission: Extremely high video performance
• Exceptionally low video distortion with zero Performance Variation vs. Optical Path Loss
• Ideally suited to networks requiring multiple physical layers where video degradation may be a problem
• Compatible with all NTSC, PAL, or SECAM CCTV camera systems
• Designed to meet full compliance with the environmental requirements (ambient operating temperature, mechanical shock, vibration, humidity with condensation, high-line/lowline voltage conditions and transient voltage protection) of NEMA TS-1/TS-2 and the Caltrans Specification for Traffic Signal Control Equipment.
• Voltage transient protection on all power and signal input/ output lines provides protection from power surges and other voltage transient events.
• Robust design ensures extremely high reliability in unconditioned out-of-plant environments
• Bi-color (Red/Green) LED status indicators provide rapid indication of critical operating parameters
• Hot-swappable rack modules
• Interchangeable between stand-alone or rack mount use - ComFit
• Lifetime Warranty

General Information
Manufacturer	ACRE
Manufacturer Part Number	FVT10D1A2C1M1
Manufacturer Website Address	http://www.acre-co.com
Brand Name	ComNet
Product Model	FVT10D1A2C1M1
Product Name	FVT10D1A2C1M1 Transceiver/Media Converter
Product Type	Transceiver/Media Converter
Interfaces/Ports
Total Number of Ports	1
Number of ST Ports	1
ST Port Type	Simplex
ST Port Type	Duplex
Media & Performance
Media Type Supported	Optical Fiber
Fiber Mode Supported	Multi-mode
Fiber Optic Cable Wavelength	1550 nm
Fiber Optic Cable Wavelength	1310 nm
Maximum Distance Supported	3 km
Fiber Optic Cable Core/Cladding Specification	62.5/125 µm
Power Description
Power Source	Power Supply
Power Consumption	4 W
Plug/Connector Type	Terminal Block
Frequency	60 Hz
Physical Characteristics
Form Factor	DIN Rail Mountable
Form Factor	Rack-mountable
Form Factor	Standalone
Height	2.2"
Width	5.3"
Depth	6.1"
Miscellaneous
Package Contents	FVT10D1A2C1M1 Transceiver/Media Converter Power Supply
Environmentally Friendly	Yes
Environmental Compliance	Waste Electrical and Electronic Equipment Directive (WEEE)
Environmental Compliance	Restriction of Hazardous Substances (RoHS)
Country of Origin	United States
Warranty
Limited Warranty	Lifetime