Moxa Mfg Mini-Store MOXA Major Lines
Moxa ICF-1170I-M-ST-T CANbus to fiber converter, multi-mode, ST connector, -40 to 85°C
MOXA Major LinesMfg Part Number: ICF-1170I-M-ST-T , Item #: 1110309
In Stock: 7
, PO and Wire.
The ICF-1170I series CANbus-to-fiber converters are used to convert CAN signals from copper to optical fiber. The converters come with 2 KV optical isolation for the CANbus system and dual power inputs with alarm contact relay to ensure that your CANbus system will remain online.
- Transmits up to 2 km over optical fiber
- Converts CAN signals to fiber and fiber to CAN signals
- Baudrate up to 1 Mbps
- Dual power inputs for redundancy
- DIP switch for 120 Ω terminal resistance
- DIP switch for fiber test mode
- LEDs for Fiber TX, Fiber RX, Power 1, Power 2
- Wide temperature model available for -40 to 85°C environments
- Fully compatible with the ISO 11898 standard
| CAN Communication | |
| CANbus Interface | ISO 11898-2, Terminals (CAN_H, CAN_L,CAN_ GND) |
| Protocols | CAN 2.0A and 2.0B (ISO 11898-2) |
| Connector Type | 3-pin removable screw terminal x1 |
| Termination Resistor | Dip switch selector for 120 ? terminal resistor |
| Buadrate | Up to 1 Mbps |
| System Delay | 150 ns |
| Isolation Protection | 2 KV |
| Transmission Distance | Max 2 km (depends on the data rate and the protocol used) |
| LED Indicators | PWR1, PWR2, Fiber TX, Fiber RX |
| Note | The transmission distance is limited by the signal rate, as mentioned in the ISO 11898-2 standard |
| Fiber Communication | |
| Connector Type | ST (multi-mode) fiber ports x 2 |
| Support Cable | 50/125, 62.5/125, or 100/140 ?m (multi-mode) |
| Wavelength | 850 nm |
| Tx Output | Multi-mode (> -5 dBm) |
| RX Sensitivity | Multi-mode (-20 dBm) |
| Physical Characteristics | |
| Housing | Aluminum (1 mm) |
| Dimensions | 30.3 x 70 x 115 mm (11.9x27.6x45.3 in) |
| Environmental Limits | |
| Operating Temperature | Standard Models: 0 to 60°C (32 to 140°F) Wide Temp. Models: -40 to 85°C (-40 to 185°F) |
| Operating Humidity | 5 to 95% RH |
| Storage Temperature | -40 to 85°C (-40 to 185°F) |
| Power Requirements | |
| Input Voltage | 12 to 48 VDC dual power inputs for redundant power |
| Power Consumption | ICF-1170I: 221 mA @ 12 V Alarm Contact: 1 relay output with current carrying of 1 A @ 24 VDC |
| Voltage Reversal Protection | Protects against V+/V- reversal |
| Over Current Protection | 1.1 A (protects against two signals shorted together) |
| Regulatory Approvals | |
| EMI | EN55022 1998, Class A |
| EMS | EN61000-4-2 (ESD), Criteria B, Level 4 EN61000-4-3 (RS), Criteria A, Level 2 EN61000-4-4 (EFT), Criteria B, Level 4 EN61000-4-5 (Surge), Criteria B, Level 2 EN61000-4-6 (CS), Criteria B, Level 2 En61000-4-8 (PFMF), Criteria A, Level 3 |
| UL/CUL | UL-508 |
| TUV | EN 60950-1 |
| CE | Class A |
| FCC | Part 15 sub Class A |
| Freefall | IEC 60068-2-32 |
| MTBF | 792085 hrs |
| Warranty | |
| Warranty Period | 5 years |
Specification
| Power Requirements | |
| Power Consumption | ICF-1170I: 221 mA @ 12 V Alarm Contact: 1 relay output with current carrying of 1 A @ 24 VDC |
| Input Voltage | 12 to 48 VDC dual power inputs for redundant power |
| Voltage Reversal Protection | Protects against V+/V- reversal |
| Over Current Protection | 1.1 A (protects against two signals shorted together) |
| Fiber Communication | |
| Wavelength | 850 nm |
| Rx Sensitivity | Multi-mode (-20 dBm) |
| Connector Type | ST (multi-mode) fiber ports |
| TX Output | Multi-mode (> -5 dBm) |
| Support Cable | 50/125, 62.5/125, or 100/140 μm (multi-mode) |
| Environmental Limits | |
| Operating Temperature | Standard Models: 0 to 60°C (32 to 140°F) Wide Temp. Models: -40 to 85°C (-40 to 185°F) |
| Storage Temperature | -40 to 85°C (-40 to 185°F) |
| Ambient Relative Humidity | 5 to 95% (non-condensing) |
| MTBF (mean time between failures) | |
| Time | 792,085 hrs |
| Database | Telcordia (Bellcore), GB |
| CAN Communication | |
| Note | The transmission distance is limited by the signal rate, as indicated in the ISO 11898-2 standard. |
| Transfer Rate | Up to 1 Mbps |
| Protocols | CAN 2.0A and 2.0B (ISO 11898-2) |
| Isolation Protection | 2 KV |
| Transmission Distance | Max 2 km (depends on the data rate and the protocol used) |
| System Delay | 150 ns |
| Connector Type | 3-pin removable screw terminal x1 |
| ESD Protection | Supports 15 KV |
| LED Indicators | PWR1, PWR2, Fiber TX, Fiber RX |
| CAN Interface | ISO 11898-2, Terminals (CAN_H, CAN_L,CAN_GND) |
| Termination Resistor | Dip switch selector for 120 Ω terminal resistor |
| Physical Characteristics | |
| Weight | Product only: 175 g (0.39 lb) Packaged: 320 g (0.71 lb) |
| Dimensions | 30.3 x 70 x 115 mm (1.19 x 2.76 x 4.53 in) |
| Housing | Aluminum (1 mm) |
| Standards and Certifications | |
| EMI | EN 55022 Class A, FCC Part 15 Subpart B Class A |
| Safety | UL 508, EN 60950-1 |
| EMS | EN 61000-4-2 (ESD) Level 4, EN 61000-4-3 (RS) Level 2, EN 61000-4-4 (EFT) Level 4, EN 61000-4-5 (Surge) Level 3, EN 61000-4-6 (CS) Level 2, EN 61000-4-8 (PFMF) Level 3 |
| EMC | CE, FCC |
| Freefall | IEC 60068-2-32 |
| Green Product | RoHS, CRoHS, WEEE |
| Warranty | |
| Warranty Period | 5 years |
| Details | See http://www.moxa.com/support/warranty.htm |
If you need accessory information for this product, please use our Online Contact Us Form , our industrial sales team is here to help you find the accessories.
WARNING:: The plastic used in cable products can expose you to lead and lead components,
chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm.
For more information go to www.P65Warnings.ca.gov
Manufacturer Warranty Policy:
MOXA
Moxa products are warranted to be free from manufacturing defects in materials and workmanship starting from the date of delivery. The actual warranty period of the product(s) depends on the product category.
Warranty Periods
- Warranty Period Products Category
- 5 Years Embedded RISC Box Computers
- 3 Years Embedded x86 Box Computers
- 2 Years Ethernet I/O Products
- 5 Years Industrial Ethernet Switches
- 5 Years Media Converters
- 5 Years Serial to Ethernet Products
- 5 Years USB to Serial Hubs
- 5 Years Video over IP Servers
- 5 Years Wireless Ethernet Products
* The 3-year warranty period for Embedded x86 Box Computers is effective for products shipped after Jan. 1, 2010. A 5-year warranty still applies to products shipped before 2010.
* For products containing storage devices (hard drives, flash drives, etc.), back up your data before sending the products for repair. Moxa is not responsible for any loss of data. Please ensure the use of properly licensed software with our systems. Moxa does not condone the use of pirated software and will not service systems using such software. Moxa will not be held legally responsible for products shipped with unlicensed software installed by the user.
* If the customer opens the computer to install an HDD without making any modifications to the unit, the warranty will remain valid.
- Warranty Period Accessories
- 3 Years SFP Ethernet Modules
- 3 Years DIN-Rail Power Supplies
- 1 Years Power Adaptors
- 1 Years Fiber Patch Cords, SC to ST Duplex Adaptors
- 5 Years Serial Connection Boxes
- 5 Years Serial Connection Cables
- Oiginal manufacturers' warranty period. Hard Drives
Product warranties remain valid provided the product was properly installed and used. Defects, malfunctions, or failures of the warranted product caused by damage resulting from acts of God (such as floods, fire, etc.), environmental and atmospheric disturbances, other external forces such as power line disturbances, host computer malfunction, plugging the board in under power, or incorrect cabling, and damage caused by misuse, abuse, and unauthorized alteration or repair, are not warranted. A product will not be warranted in the following situations:
- The product has been found to be defective after the warranty period has expired.
- The product has been subjected to misuse, abuse, or unauthorized repair, whether by accident or other cause. Such conditions will be determined by Moxa at its sole and unfettered discretion.
- The warranty for customized and ODM products is defined by contract, and is excluded from this policy.
- The product is an accessory not carrying the Moxa brand name. In this case, warranties are limited to the warranty provided by the original manufacturer of the accessory. Examples of such products and accessories are power adaptors and cables.
- The product has been updated, reworked, or improperly tested by the customer, or by a third party at the request of the customer.
- The product is damaged beyond repair due to natural disasters, such as by lightning, flood, earthquake, etc.
- The product in question is either software, or an expendable item, such as a fuse, battery, SD/ CF card, RAM/ DOM module, etc.
- Products with altered and/or damaged serial numbers are not entitled to ourwill not be serviced by Moxa.
This warranty is limited to the repair and/or replacement, at Moxa's sole discretion, of the defective product during its warranty period. Moxa will replace any product found to be defective within the first three months of purchase provided said product was properly installed and used. The customer must obtain a Return Merchandise Authorization (RMA) number prior to returning the defective product to Moxa for service.
The customer agrees to insure the product or assume the risk of loss or damage during transit, to prepay shipping charges, and to use the original shipping container or equivalent. Customers may either seek assistance from the original dealer, or from the closest Moxa Service Office. Repaired or replaced products are warranted for ninety (90) days from the date of repair or replacement, or for the remainder of the original product's warranty period, whichever is longer. For large order projects, customers may purchase an extended maintenance contract. Such products may have a shorter chipset life cycle, or some parts may have a limited warranty from the original supplier of the parts. Please contact Moxa's sales department if you would like to extend the maintenance period of a Moxa product.
Limitation of Liability
The provisions of the warranty are in lieu of any other warranty, whether expressed or implied, written or oral. Moxa's liability arising out of the manufacture, sale, or supplying of the product and its use, whether based on warranty, contract, negligence, product liability, or otherwise, shall not exceed the original cost of the product. In no event shall Moxa be liable for unintended or consequential damages, including, but not limited to, a loss of profits or use damages arising out of the manufacture, sale, or supplying of the product.
