Data at Rest Security... Simplified

Citadel FIPS-certified self-encrypting drives (SEDs) are the only SSDs to integrate multifactor authentication, pre-boot authentication (PBA), and hardware encryption into a complete, low cost solution.

Pre-Boot Authentication Keeps Intruders Away

Powered by CipherDrive®, our built-in PBA unlocks access to the encrypted operating system or virtual machine on the Citadel K-MD SED as well as the data stored there. This secured data is encrypted by NSA-approved Advanced Encryption Standard (AES) 256-bit encryption at the hardware level. Once booted, Citadel allows no-overhead, hardware-speed access to encrypted data at the full performance of the system. 

Multi-Drive Support

Unlock one SED to authorize access to all SEDs. Perfect for tactical servers and other systems with multiple Citadel K-MD SEDs installed.

A Complete CSfC Layer

All DIGISTOR FIPS SEDs—including Citadel K Series SEDs—are listed on the NSA CSfC Component List for hardware full drive encryption, which allows DoD, Federal agencies, and critical infrastructure to protect mission critical and classified data using commercial solutions. Together with the built-in PBA  which is also CSfC listed for hardware full drive encryption, a Citadel K Series SED constitutes a complete CSfC layer.

NIAP Compliant, TAA Compliant, and Common Criteria Certified

All Citadel K-Series SEDs are NIAP-compliant  (VID #11297), TAA compliant, and have been listed by NIST as FIPS 140-2 L2 certified storage devices with NIST Certificate #3926 , ensuring they meet most stringent cybersecurity standards.

Wide OS and Hypervisor Compatibility

Citadel K-MD SEDs are used in Windows and Linux operating systems as well as with SecureView and Forcepoint.

Compatible with Major Computer Manufacturers

Computer systems that are supported by Citadel K Series Secure SEDs are contained in this hardware compatibility list (HCL).

 

• Designed for heavy read workloads in enterprise environments
• TAA Compliant

DIGISTOR's Enterprise SSD drives are an ideal storage solution for applications that deliver a combination of performance and reliability. Meet the heavy workload demands of server and data center environments

VaultDisk® Secure SED is a removable Mini-2.5" SSD Self-Encrypting Drive for use with Dell systems that have removable drive support, so no tools are needed to swap the secured boot drive. The removable SSD creates the ability to cold swap your boot drive in seconds, saving man hours and securing all critical data. TCG Opal 2.0 hardware level AES 256-bit encryption means the encryption/decryption is performed on device, independent from the host, reducing CPU load.

 

Available for Special Order - Network ID Distinction Drive Colors
Color: Gray (Standard)
Color: Green
Color: Red
Color: Yellow
Color: Pink

  

Features

VaultDisk® Secure SED is a removable Mini-26128 SSD Self-Encrypting Drive for use with Dell systems that have removable drive support, so no tools are needed to swap the secured boot drive. The removable SSD creates the ability to cold swap your boot drive in seconds, saving man hours and securing all critical data. TCG Opal 2.0 hardware level AES 256-bit encryption means the encryption/decryption is performed on device, independent from the host, reducing CPU load.

• Designed exclusively for Dell Latitude 5430 and 7330 rugged laptops
• PCIe Gen 3x4 provides data transfer speeds up to 4 GB/s

TCG Opal 2.0

Protected with AES 256-bit encryption and random key generation at the hardware level, ensuring fast file access without any overhead.

Address critical data governance and privacy requirements

TCG Opal 2.0 capability meets the same standards used by the U.S. government to keep data secure to meet requirements imposed by CMMC, HIPAA, GDPR, GLBA, PCI-DSS, and CCPA.

Removability creates security and new ways to work

Remove and lock away drives you don't want stolen and leave no data on the laptop itself, or use multiple removable drives on the same workstation to work in multiple OS environments. There are many ways to use removable drives to enhance your workflow efficiency.

Extraordinary performance

DIGISTOR removable drives for rugged laptops are are designed from the ground up to deliver consistent performance for a variety of applications. They are available in 256GB, 512GB, 1TB, and 2TB capacities and run at PCIe Gen 3 speeds.

No hardware installation required

Every DIGISTOR removable drive for rugged laptops comes pre-installed in the appropriate module so it will fit right into your rugged device. No tools required.

Overview

• Designed exclusively for Dell Latitude 5430 and 7330 rugged laptops
• PCIe Gen 3x4 provides data transfer speeds up to 4 GB/s

FIPS 140-2 L2

FIPS 140-2 L2 includes AES 256-bit encryption and random key generation at the hardware level, ensuring fast file access without any overhead. When combined with third-party pre-boot authentication, your data is protected from physical theft.

Address critical data governance and privacy requirements

This drive is FIPS 140-2 L2 Certified by NIST and is Common Criteria Validated and NIAP Listed. These are the same standards used by the U.S. government to keep data secure to meet requirements imposed by CMMC, HIPAA, GDPR, GLBA, PCI-DSS, and CCPA. Our drives are compared against the NIAP Full Drive Encryption/Encryption Engine Common Criteria (CC) collaborative Protection Profile (cPP) which ensures full compliance with the cPP security requirements.

Removability creates security and new ways to work

Remove and lock away drives you don't want stolen and leave no data on the laptop itself, or use multiple removable drives on the same workstation to work in multiple OS environments. There are many ways to use removable drives to enhance your workflow efficiency.

Extraordinary performance

DIGISTOR removable drives for rugged laptops are are designed from the ground up to deliver consistent performance for a variety of applications. They are available in 256GB, 512GB, 1TB, and 2TB capacities and run at PCIe Gen 3 speeds.

No hardware installation required

Every DIGISTOR removable drive for rugged laptops comes pre-installed in the appropriate module so it will fit right into your rugged device. No tools required.

• Designed exclusively for Dell Latitude 5430 and 7330 rugged laptops
• PCIe Gen 3x4 provides data transfer speeds up to 4 GB/s

Extraordinary performance

DIGISTOR removable drives for rugged laptops are are designed from the ground up to deliver consistent performance for a variety of applications. They are available in 256GB, 512GB, 1TB, and 2TB capacities and run at PCIe Gen 3 speeds.

Removability creates security and new ways to work

Remove and lock away drives you don't want stolen and leave no data on the laptop itself, or use multiple removable drives on the same workstation to work in multiple OS environments. There are many ways to use removable drives to enhance your workflow efficiency.

No hardware installation required

Every DIGISTOR removable drive for rugged laptops comes pre-installed in the appropriate module so it will fit right into your rugged device. No tools required.

Data at Rest Security... Simplified

Citadel FIPS-certified self-encrypting drives (SEDs) are the only SSDs to integrate multifactor authentication, pre-boot authentication (PBA), and hardware encryption into a complete, low cost solution.

Pre-boot Authentication Keeps Intruders Away

Powered by Cigent®, our built-in PBA unlocks access to the encrypted operating system or virtual machine on the Citadel C-ADV SED as well as the data stored there. This secured data is encrypted by NSA-approved Advanced Encryption Standard (AES) 256-bit encryption at the hardware level. Once booted, Citadel allows no-overhead, hardware-speed access to encrypted data at the full performance of the system.

Adversaries cannot steal what they cannot see

Unreadable storage partition protected by non-recoverable key.

Worry-Free Deployment

Cigent software is tested and validated for use with Citadel C-ADV SEDs.

Multi-Factor Authentication (MFA)

Requires more than one authentication for access. Multiple authentication methods include password, CAC/PIV smartcard, and PIV-supported Yubikey.

Additional Authentication for File Access

Zero-day ransomware, malware, and software service bypass prevention.

Commercial Solutions for Classified

DIGISTOR's FIPS SEDs are listed on the NSA CSfC Component List for hardware full drive encryption, which allows the US Department of Defense, Federal agencies, and critical infrastructure to protect mission critical and classified data using commercial solutions.

NIAP Compliant, TAA Compliant, and Common Criteria Certified

Citadel C-ADV SEDs are NIAP-compliant  (VID #11297), TAA compliant, and have been listed by NIST as FIPS 140-2 L2 certified storage devices with NIST Certificate #4294 , ensuring they meet most stringent cybersecurity standards.

Verified Device Erasure

Ensures every block has truly been wiped.

Immutable Insider Detection

Secure data access logs capture all insider threat activity.

Automated Threat Response

Makes data invisible if Cigent Data Defense is disabled.

Address critical requirements for data governance and privacy programs

Citadel C-ADV SEDs meet CMMC, HIPAA, GDPR, GLBA, PCI-DSS, and CCPA requirements.

No Monitor or Keyboard Required

Citadel K-GL self-encrypting drives (SEDs) are specialized for headless applications. The system waits for an authorized USB security key to be inserted before unlocking and booting up. This allows you to protect against unauthorized access to data on UAVs, tactical edge devices, and appliances.

Data at Rest Security... Simplified

Citadel FIPS-certified SEDs are the only SSDs to integrate multifactor authentication, pre-boot authentication (PBA), and hardware encryption into a complete, low cost solution.

Pre-Boot Authentication Keeps Intruders Away

Powered by CipherDrive®, our built-in PBA unlocks access to the encrypted operating system or virtual machine on the Citadel K-GL SED as well as the data stored there. This secured data is encrypted by NSA-approved Advanced Encryption Standard (AES) 256-bit encryption at the hardware level. Once booted, Citadel allows no-overhead, hardware-speed access to encrypted data at the full performance of the system. 

A Complete CSfC Layer

All DIGISTOR FIPS SEDs—including Citadel K Series SEDs—are listed on the NSA CSfC Component List for hardware full drive encryption, which allows DoD, Federal agencies, and critical infrastructure to protect mission critical and classified data using commercial solutions. Together with the built-in PBA  which is also CSfC listed for hardware full drive encryption, a Citadel K Series SED constitutes a complete CSfC layer.

NIAP Compliant, TAA Compliant, and Common Criteria Certified

All Citadel K-Series SEDs are NIAP-compliant  (VID #11297), TAA compliant, and have been listed by NIST as FIPS 140-2 L2 certified storage devices with NIST Certificate #3926 , ensuring they meet most stringent cybersecurity standards.

Wide OS and Hypervisor Compatibility

Citadel K-GL SEDs can be used with Windows and Linux operating systems as well as with SecureView and Forcepoint.

 

Data at Rest Security... Simplified

Citadel FIPS-certified self-encrypting drives (SEDs) are the only SSDs to integrate multifactor authentication, pre-boot authentication (PBA), and hardware encryption into a complete, low cost solution.

Pre-boot Authentication Keeps Intruders Away

Powered by Cigent®, our built-in PBA unlocks access to the encrypted operating system or virtual machine on the Citadel C-SEL SED as well as the data stored there. This secured data is encrypted by NSA-approved Advanced Encryption Standard (AES) 256-bit encryption at the hardware level. Once booted, Citadel allows no-overhead, hardware-speed access to encrypted data at the full performance of the system.

Adversaries cannot steal what they cannot see

Unreadable storage partition protected by non-recoverable key.

Worry-Free Deployment

Cigent software is tested and validated for use with Citadel C-SEL SEDs.

Multi-Factor Authentication (MFA)

Requires more than one authentication for access. Multiple authentication methods include password, CAC/PIV smartcard, and PIV-supported Yubikey.

Additional Authentication for File Access

Zero-day ransomware, malware, and software service bypass prevention.

TCG Opal 2.0

Protected with AES 256-bit encryption and random key generation at the hardware level, ensuring fast file access without any overhead.

TAA Compliant

Citadel C-SEL SEDs are TAA compliant so they can protect information on government systems.

Address critical requirements for data governance and privacy programs

Citadel C-SEL SEDs meet CMMC, HIPAA, GDPR, GLBA, PCI-DSS, and CCPA requirements.

Data at Rest Security... Simplified

Citadel FIPS-certified self-encrypting drives (SEDs) are the only SSDs to integrate multifactor authentication, pre-boot authentication (PBA), and hardware encryption into a complete, low cost solution.

Pre-boot Authentication Keeps Intruders Away

Powered by Cigent®, our built-in PBA unlocks access to the encrypted operating system or virtual machine on the Citadel C-SEL SED as well as the data stored there. This secured data is encrypted by NSA-approved Advanced Encryption Standard (AES) 256-bit encryption at the hardware level. Once booted, Citadel allows no-overhead, hardware-speed access to encrypted data at the full performance of the system.

Adversaries cannot steal what they cannot see

Unreadable storage partition protected by non-recoverable key.

Worry-Free Deployment

Cigent software is tested and validated for use with Citadel C-SEL SEDs.

Multi-Factor Authentication (MFA)

Requires more than one authentication for access. Multiple authentication methods include password, CAC/PIV smartcard, and PIV-supported Yubikey.

Additional Authentication for File Access

Zero-day ransomware, malware, and software service bypass prevention.

Commercial Solutions for Classified

DIGISTOR's FIPS SEDs are listed on the NSA CSfC Component List for hardware full drive encryption, which allows the US Department of Defense, Federal agencies, and critical infrastructure to protect mission critical and classified data using commercial solutions.

NIAP Compliant, TAA Compliant, and Common Criteria Certified

Citadel C-SEL FIPS SEDs are NIAP-compliant  (VID #11297), TAA compliant, and have been listed by NIST as FIPS 140-2 L2 certified storage devices with NIST Certificate #4294 , ensuring they meet most stringent cybersecurity standards.

Address critical requirements for data governance and privacy programs

Citadel C-SEL SEDs meet CMMC, HIPAA, GDPR, GLBA, PCI-DSS, and CCPA requirements.

Data at Rest Security... Simplified

Citadel FIPS-certified self-encrypting drives (SEDs) are the only SSDs to integrate multifactor authentication, pre-boot authentication (PBA), and hardware encryption into a complete, low cost solution.

Pre-Boot Authentication Keeps Intruders Away

Powered by CipherDrive®, our built-in PBA unlocks access to the encrypted operating system or virtual machine on the Citadel K-MD SED as well as the data stored there. This secured data is encrypted by NSA-approved Advanced Encryption Standard (AES) 256-bit encryption at the hardware level. Once booted, Citadel allows no-overhead, hardware-speed access to encrypted data at the full performance of the system. 

Multi-Drive Support

Unlock one SED to authorize access to all SEDs. Perfect for tactical servers and other systems with multiple Citadel K-MD SEDs installed.

A Complete CSfC Layer

All DIGISTOR FIPS SEDs—including Citadel K Series SEDs—are listed on the NSA CSfC Component List for hardware full drive encryption, which allows DoD, Federal agencies, and critical infrastructure to protect mission critical and classified data using commercial solutions. Together with the built-in PBA  which is also CSfC listed for hardware full drive encryption, a Citadel K Series SED constitutes a complete CSfC layer.

NIAP Compliant, TAA Compliant, and Common Criteria Certified

All Citadel K-Series SEDs are NIAP-compliant  (VID #11297), TAA compliant, and have been listed by NIST as FIPS 140-2 L2 certified storage devices with NIST Certificate #3926 , ensuring they meet most stringent cybersecurity standards.

Wide OS and Hypervisor Compatibility

Citadel K-MD SEDs are used in Windows and Linux operating systems as well as with SecureView and Forcepoint.

Compatible with Major Computer Manufacturers

Computer systems that are supported by Citadel K Series Secure SEDs are contained in this hardware compatibility list (HCL).

 

Data at Rest Security... Simplified

Citadel FIPS-certified self-encrypting drives (SEDs) are the only SSDs to integrate multifactor authentication, pre-boot authentication (PBA), and hardware encryption into a complete, low cost solution.

Pre-boot Authentication Keeps Intruders Away

Powered by Cigent®, our built-in PBA unlocks access to the encrypted operating system or virtual machine on the Citadel C-SEL SED as well as the data stored there. This secured data is encrypted by NSA-approved Advanced Encryption Standard (AES) 256-bit encryption at the hardware level. Once booted, Citadel allows no-overhead, hardware-speed access to encrypted data at the full performance of the system.

Adversaries cannot steal what they cannot see

Unreadable storage partition protected by non-recoverable key.

Worry-Free Deployment

Cigent software is tested and validated for use with Citadel C-SEL SEDs.

Multi-Factor Authentication (MFA)

Requires more than one authentication for access. Multiple authentication methods include password, CAC/PIV smartcard, and PIV-supported Yubikey.

Additional Authentication for File Access

Zero-day ransomware, malware, and software service bypass prevention.

TCG Opal 2.0

Protected with AES 256-bit encryption and random key generation at the hardware level, ensuring fast file access without any overhead.

TAA Compliant

Citadel C-SEL SEDs are TAA compliant so they can protect information on government systems.

Address critical requirements for data governance and privacy programs

Citadel C-SEL SEDs meet CMMC, HIPAA, GDPR, GLBA, PCI-DSS, and CCPA requirements.