Compaq 18.20 GB 3.5" Hard Drive
HPE Ultrium Universal Cleaning Cartridge - LTO Ultrium - orange - cleaning cartridge - for HPE T950, T950 3, T950 6; StoreEver MSL2024, MSL3040, MSL4048, MSL6480; SureStore Ultrium
LTO-Ultrium Universal Cleaning Cartridge is compatible with all manufacturers' LTO Ultrium 1, 2, 3 and 4 drives and provides up to 50 cleanings or as many as your particular drive allows. Cleaning is done by shuffling a specific amount of tape over the drive head based on a specific cleaning algorithm that is unique to each drive manufacturer. Cleaning reduces built-up or stains that get deposited on drive heads and should be done whenever the drive's "use cleaning cartridge" signal is flashing. It is recommended that you keep track of the number of times you use the cartridge and discard it after it reaches the maximum number of uses for your drive model. In addition, the cartridge has an RF (radio frequency) LTO-CM (cartridge memory) that keeps track of the number of times your cartridge has been used. Most drives will read the CM, see when your drive has been used the maximum number of times, and will no longer use that cleaning cartridge.
HPE - Crossover cable - RJ-45 (M) to RJ-45 (M) - 7 ft - CAT 5e - for Modular Smart Array P2000 G3
Category 5 (CAT 5) cable is typically used in local area networks (LAN) and premises cabling.
CAT 5e cabling is an enhanced version of CAT 5. The stringent specifications ensure optimal transmission speeds and reduce crosstalk for reliable gigabit ethernet and data networks.
HPE - Rack slide rail kit - for Rack 9842, Workstation xw4200, xw4300, xw9300, HPE 600, ProLiant 3000, StorageWorks 9142
This depth adjustable fixed rail kit contains two, 19" to 31" , depth adjustable rails that mount Compaq rack-mountable servers, storage boxes, UPSs, and Compaq networking products in third party racks. The Depth Adjustable Fixed Rail Kit also allows for most third party rack-mountable products to be mounted in Compaq Racks.
HPE StoreFabric SN1600E - Host bus adapter - PCIe 3.0 x8 - 32Gb Fibre Channel x 2 - for Apollo 4200 Gen10, 4510 Gen10, ProLiant DL360 Gen10, DL385 Gen10, XL270d Gen10
The HPE StoreFabric 32Gb Fibre Channel Host Bus Adapters are designed to support ProLiant Servers with PCI-Express I/O slots to connect to Hewlett Packard Enterprise Storage Arrays using the 32/16/8 Gb Fibre Channel protocol.
The HPE 32GFC Host Bus Adapters bring datacenter infrastructure components to a higher level of performance and efficiency with the ability to deliver twice the bandwidth performance of 16Gb HBAs at lower latency. A 32GFC HBA purchased today is backward compatible with 16Gb and 8Gb storage networks and will protect future investments. When using storage intensive applications, such as backup/restore, database transactions, virtualization, and rich media, the increased performance of the 32GFC infrastructure enables rapid storage and retrieval of critical information. Designed for environments with greater virtual machine density and bandwidth requirements, the 32GFC HBAs enable more applications and VMs to run on a single host server and Fibre Channel port, resulting in reduced cabling and a higher return on IT investment. Enhanced diagnostics and orchestration capabilities make 32Gb Fibre Channel adapters well suited for to deliver on SLA requirements and application performance.
What's New
HPE ProLiant Gen10 Servers support
Key Features and Benefits
Performance
- Up to two ports of Gen6 FC delivers 1.6 million1 IOPS and 12,800MBps bandwidth across two 32GFC ports. Enhanced reliability, diagnostics, and accelerated deployment powered by Gen 6 Fibre Channel ASIC.
- Advanced integration with HPE StoreFabric B-series Gen 5 and Gen 6 fabrics to speed SAN deployment and configuration, speed and simplify SAN diagnostics, improve SAN resiliency and Quality of Service.
- Best combination of Fibre Channel IOPS, latency and throughput performance enables increased application and database transactions per second, enables faster large block transfers and increases the number of VMs that can be supported per server.
Latest generation technology saves power by pausing the SFP when activity is not present Gbps per watt increased 100% providing better power consumption compared to previous generations of Fibre Channel adapters.
Support for greater Server Virtualization
Higher bandwidth and ability to virtualize physical ports with QoS in the adapter, make these adapters ideal for high density server virtualization environments for increased scalability. Enables more applications and VMs to run on a single server and Fibre Channel port, resulting in reduced cabling and a higher return on IT investment.
Connectivity to HPE Server and Storage
Provides an HPE-branded HBA solution which has undergone extensive HPE interoperability testing for connecting HPE ProLiant servers into HPE Storage and networking environments.
HPE 800mm x 1075mm G2 Enterprise Pallet Rack - Rack - black with silver accents - 42U - 19"
Do you need a rack that helps fine-tune options to achieve more compute power in limited space? HPE G2 Enterprise Series Racks offer innovative physical security, structural integrity, cooling and cable management features and a wide choice of power and switching options to match your high-density IT requirements today and in the future. G2 Enterprise Series Racks have a 10-year limited warranty that provides either repair or complete replacement of the rack. We can offer this industry-leading warranty due to the highly durable design with fully-wielded, roll-form rack design, heavy-gauge rails, and heavy-duty castors. Select shock pallet models include packaging specifically designed to support the shipment of pre-configured racks with up to 3,000 lbs. of IT equipment. Choose an HPE G2 Enterprise Series Rack for IT workloads that require a greater load capacity, additional physical security options or if you prefer a rack that can be fully configured and shipped to your site.
What's new
- 10-year limited warranty that provides either repair or complete replacement of the rack.
- Network racks include repositioned vertical EIA rails to accommodate front to rear cabling and additional bristle covered cable access slots to prevent mixing of air and allow pass-through of cables.
- Universal lock tooling that supports the integration of electronic and biometric security solutions.
- Flush-mount side panels allow racks to be bayed with side panels installed.
- Redesigned rack bottom providing unobstructed access to data center floor.
- Removal and reversible rack canopy with pre-installed brush strips capable of supporting easy pass-through of large cables and connectors.
HPE 800mm x 1200mm G2 Enterprise Shock Rack - Rack - black with silver accents - 48U - 19"
Do you need a rack that helps fine-tune options to achieve more compute power in limited space? HPE G2 Enterprise Series Racks offer innovative physical security, structural integrity, cooling and cable management features and a wide choice of power and switching options to match your high-density IT requirements today and in the future. G2 Enterprise Series Racks have a 10-year limited warranty that provides either repair or complete replacement of the rack. We can offer this industry-leading warranty due to the highly durable design with fully-wielded, roll-form rack design, heavy-gauge rails, and heavy-duty castors. Select shock pallet models include packaging specifically designed to support the shipment of pre-configured racks with up to 3,000 lbs. of IT equipment. Choose an HPE G2 Enterprise Series Rack for IT workloads that require a greater load capacity, additional physical security options or if you prefer a rack that can be fully configured and shipped to your site.
What's new
- 10-year limited warranty that provides either repair or complete replacement of the rack.
- Network racks include repositioned vertical EIA rails to accommodate front to rear cabling and additional bristle covered cable access slots to prevent mixing of air and allow pass-through of cables.
- Universal lock tooling that supports the integration of electronic and biometric security solutions.
- Flush-mount side panels allow racks to be bayed with side panels installed.
- Redesigned rack bottom providing unobstructed access to data center floor.
- Removal and reversible rack canopy with pre-installed brush strips capable of supporting easy pass-through of large cables and connectors.
HPE 800mm x 1200mm G2 Enterprise Shock Network Rack - Rack - black with silver accents - 42U - 19"
Do you need a rack that helps fine-tune options to achieve more compute power in limited space? HPE G2 Enterprise Series Racks offer innovative physical security, structural integrity, cooling and cable management features and a wide choice of power and switching options to match your high-density IT requirements today and in the future. G2 Enterprise Series Racks have a 10-year limited warranty that provides either repair or complete replacement of the rack. We can offer this industry-leading warranty due to the highly durable design with fully-wielded, roll-form rack design, heavy-gauge rails, and heavy-duty castors. Select shock pallet models include packaging specifically designed to support the shipment of pre-configured racks with up to 3,000 lbs. of IT equipment. Choose an HPE G2 Enterprise Series Rack for IT workloads that require a greater load capacity, additional physical security options or if you prefer a rack that can be fully configured and shipped to your site.
What's new
- 10-year limited warranty that provides either repair or complete replacement of the rack.
- Network racks include repositioned vertical EIA rails to accommodate front to rear cabling and additional bristle covered cable access slots to prevent mixing of air and allow pass-through of cables.
- Universal lock tooling that supports the integration of electronic and biometric security solutions.
- Flush-mount side panels allow racks to be bayed with side panels installed.
- Redesigned rack bottom providing unobstructed access to data center floor.
- Removal and reversible rack canopy with pre-installed brush strips capable of supporting easy pass-through of large cables and connectors.
HPE 800mm x 1200mm G2 Enterprise Shock Rack - Rack - black with silver accents - 42U - 19"
Do you need a rack that helps fine-tune options to achieve more compute power in limited space? HPE G2 Enterprise Series Racks offer innovative physical security, structural integrity, cooling and cable management features and a wide choice of power and switching options to match your high-density IT requirements today and in the future. G2 Enterprise Series Racks have a 10-year limited warranty that provides either repair or complete replacement of the rack. We can offer this industry-leading warranty due to the highly durable design with fully-wielded, roll-form rack design, heavy-gauge rails, and heavy-duty castors. Select shock pallet models include packaging specifically designed to support the shipment of pre-configured racks with up to 3,000 lbs. of IT equipment. Choose an HPE G2 Enterprise Series Rack for IT workloads that require a greater load capacity, additional physical security options or if you prefer a rack that can be fully configured and shipped to your site.
What's new
- 10-year limited warranty that provides either repair or complete replacement of the rack.
- Network racks include repositioned vertical EIA rails to accommodate front to rear cabling and additional bristle covered cable access slots to prevent mixing of air and allow pass-through of cables.
- Universal lock tooling that supports the integration of electronic and biometric security solutions.
- Flush-mount side panels allow racks to be bayed with side panels installed.
- Redesigned rack bottom providing unobstructed access to data center floor.
- Removal and reversible rack canopy with pre-installed brush strips capable of supporting easy pass-through of large cables and connectors.
HPE 800mm x 1200mm G2 Enterprise Pallet Rack - Rack - black with silver accents - 42U - 19"
Do you need a rack that helps fine-tune options to achieve more compute power in limited space? HPE G2 Enterprise Series Racks offer innovative physical security, structural integrity, cooling and cable management features and a wide choice of power and switching options to match your high-density IT requirements today and in the future. G2 Enterprise Series Racks have a 10-year limited warranty that provides either repair or complete replacement of the rack. We can offer this industry-leading warranty due to the highly durable design with fully-wielded, roll-form rack design, heavy-gauge rails, and heavy-duty castors. Select shock pallet models include packaging specifically designed to support the shipment of pre-configured racks with up to 3,000 lbs. of IT equipment. Choose an HPE G2 Enterprise Series Rack for IT workloads that require a greater load capacity, additional physical security options or if you prefer a rack that can be fully configured and shipped to your site.
What's new
- 10-year limited warranty that provides either repair or complete replacement of the rack.
- Network racks include repositioned vertical EIA rails to accommodate front to rear cabling and additional bristle covered cable access slots to prevent mixing of air and allow pass-through of cables.
- Universal lock tooling that supports the integration of electronic and biometric security solutions.
- Flush-mount side panels allow racks to be bayed with side panels installed.
- Redesigned rack bottom providing unobstructed access to data center floor.
- Removal and reversible rack canopy with pre-installed brush strips capable of supporting easy pass-through of large cables and connectors.
400GB SAS 12G MU SFF SC DS SSD
Do you need to accelerate the performance of your data-intensive application workloads? HPE Server Mixed Use (MU) Solid State Drives (SSDs) deliver high performance and endurance while reducing power consumption for customers with applications requiring high random read and write IOPs performance. HPE MU SSDs offer the highest performance applications that need a balance of strong read and write and they typically have an endurance of between <1 and <10 drive writes per day. HPE SSDs are backed by over 2.4 million hours of the industry's most rigorous testing and qualification program ensuring reliable, high performing drives. HPE integrated firmware protects data from malicious attacks that could change or destroy it. The self-describing icons on the HPE SMART Carrier takes the guess work out of a drive's status and a "do not remove" button prevents data loss from human error. You can monitor the lifespan of your SSD with HPE SmartSSD Wear Gauge compatibility in management tools.
Features
High Performance, Exceptional Reliability and Efficiency for Faster Business Results
HPE Mixed Use (MU) Solid State Drives (SSD) are ideal for Big Data Analytics, Cloud Computing, Active Archiving, Database Applications and Data Warehousing.
Achieve higher Input / Output per Second (IOPs) to enhance the performance of your data center.
Maintains data accuracy with full data-path error detection.
A broad portfolio of optimized solutions in capacities up to 1.6 TB and growing.
12 GB SAS, 6 GB SATA and NVMe.
HPE 800mm x 1075mm G2 Enterprise Shock Rack - Rack - black with silver accents - 42U - 19"
Do you need a rack that helps fine-tune options to achieve more compute power in limited space? HPE G2 Enterprise Series Racks offer innovative physical security, structural integrity, cooling and cable management features and a wide choice of power and switching options to match your high-density IT requirements today and in the future. G2 Enterprise Series Racks have a 10-year limited warranty that provides either repair or complete replacement of the rack. We can offer this industry-leading warranty due to the highly durable design with fully-wielded, roll-form rack design, heavy-gauge rails, and heavy-duty castors. Select shock pallet models include packaging specifically designed to support the shipment of pre-configured racks with up to 3,000 lbs. of IT equipment. Choose an HPE G2 Enterprise Series Rack for IT workloads that require a greater load capacity, additional physical security options or if you prefer a rack that can be fully configured and shipped to your site.
What's new
- 10-year limited warranty that provides either repair or complete replacement of the rack.
- Network racks include repositioned vertical EIA rails to accommodate front to rear cabling and additional bristle covered cable access slots to prevent mixing of air and allow pass-through of cables.
- Universal lock tooling that supports the integration of electronic and biometric security solutions.
- Flush-mount side panels allow racks to be bayed with side panels installed.
- Redesigned rack bottom providing unobstructed access to data center floor.
- Removal and reversible rack canopy with pre-installed brush strips capable of supporting easy pass-through of large cables and connectors.
ARUBA 8320 32 40G X472 5 2 Bundle JMPCBL-NA/JP/TW PL-NV
The past several decades in networking have been defined by static, closed networking solutions designed for the client-server era. The Aruba 8320 Switch Series, a campus core and aggregation switch, is a game-changing solution that offers an innovative approach to dealing with the demands of the mobile, cloud and IoT era. The Aruba 8320 is based on ArubaOS-CX, a modern software system that automates and simplifies critical and complex network tasks, delivers enhanced fault tolerance and facilitates zero-service disruption during planned or unplanned control-plane events. The key innovations in ArubaOS-CX are its micro-services style modular architecture, REST APIs, Python scripting capabilities and the Aruba Network Analytics Engine. The Aruba 8320 Switch Series provides line rate 10GbE and 40GbE in a compact 1U form factor and together with the modular Aruba 8400 Switch, rounds out the Aruba Mobile First switching portfolio with an enterprise core and aggregation solution.
What's new
- High-performance Aruba campus core and aggregation switch with 2.5 Tbps switching capacity.
- ArubaOS-CX automates using REST APIs and Python scripts.
- Monitor and troubleshoot with Aruba Network Analytics Engine.
- Compact 1U switches with 10GbE (SFP/SFP+ or 10GBASE-T) and 40GbE connectivity.
- Advanced Layer 2/3 feature set includes BGP, OSPF, VRF and IPv6.
Features
Game-changing Business Agility
The Aruba 8320 Switch Series is a campus core and aggregation switch solution with an innovative and powerful approach to dealing with the new applications, security and scalability demands of the mobile, cloud and IoT era.
Fully programmable with ArubaOS-CX, it brings automation and visibility and helps troubleshoot via simple scripting.
Aruba Network Analytics Engine provides the ability to monitor and troubleshoot the network, system, application and security related issues easily, through simple python agents and REST APIs.
Offers high-speed fully distributed architecture with 2.5 Tbps switching capacity for always on networking.
Provides robust security and QoS with advanced Layer 2 and Layer 3 features including support for BGP, OSPF, and VRF.
Modern Software System Simplifies and Automates
The Aruba 8320 Switch Series is based on the new ArubaOS-CX, a modern software system for the core that automates and simplifies many critical and complex network tasks.
The built-in time series database enables customers and developers to develop software modules for historical troubleshooting, as well as analysis of historical trends, to predict and avoid future problems due to scale, security and performance bottlenecks.
It includes stability, independent monitoring and restart of individual software modules, and enhanced software process serviceability functions. And it allows individual software modules to be upgraded for higher availability.
High Performance
The Aruba 8320 Switch Series includes a high-speed, fully distributed architecture and provides up to 2.5 Tbps switching capacity to meet the demands and bandwidth-intensive applications today and in the future.
The compact 1U switch series delivers line rate 10GbE and 40GbE connectivity with very low latency for support of full Internet routes. Optimize for your deployment with a model that provides 32 ports of 40GbE, and models with 48 ports of 10GbE (SFP/SFP+ or 10GBASE-T) with 6 ports of 40GbE.
You get resiliency and high availability with redundant power supplies and fans.
HPE SmartMemory - DDR4 - 16 GB - DIMM 288-pin - 2933 MHz / PC4-23400 - CL21 - 1.2 V - registered - ECC
Has your server been configured with the memory it needs to perform as its role expands over time? HPE Server Memory is designed for SMB and enterprise customers with a significant need for performance and capacity, along with a desire to manage total cost of ownership. HPE SmartMemory enables total server memory optimization, runs at top throughput speed, and is among the most power-efficient memory available. In addition to performance and efficiency, HPE SmartMemory also delivers on reliability. Only the highest-quality DRAM modules are selected from top suppliers. Now more than ever, DRAM quality is critical, as data center trends such as server virtualization, cloud computing, and the use of large database applications have increased the need for higher-capacity memory with greater up-time. HPE SmartMemory undergoes rigorous qualification and testing processes that unlock memory performance features available only with HPE servers.
What's new
- HPE SmartMemory 2933 MT/s memory supported on HPE Gen10 Intel servers
Features
High Performance
HPE DDR4 2933 MT/s SmartMemory provides improvements in bandwidth in comparison to DDR4 2666 MT/s memory modules.
HPE DDR4 SmartMemory delivers improvements in latency at 2933 MT/s in comparison to DDR4 2666 MT/s memory modules.
High Reliability
Hewlett Packard Enterprise tests and qualifies HPE DDR4 SmartMemory modules on all HPE server platforms to deliver the highest level of signal integrity.
HPE DDR4 SmartMemory prevents unnecessary DIMM replacement and reduces server downtime with advanced memory error detection technology.
HPE uses the highest quality materials for its DDR4 server memory, reducing issues that may affect signal integrity and increasing system reliability.
HPE provides server memory that performs above industry standards, enabling customers to increase the performance of their servers without having to increase the amount of memory purchased.
ARUBA 5406R 8XGT POE+/8SFP+ V3 SWCH BUNDLED SERVICES REMOVAL PL-35
HPE SmartMemory - DDR4 - 16 GB - DIMM 288-pin - 2933 MHz / PC4-23400 - CL21 - 1.2 V - registered - ECC
Has your server been configured with the memory it needs to perform as its role expands over time? HPE Server Memory is designed for SMB and enterprise customers with a significant need for performance and capacity, along with a desire to manage total cost of ownership. HPE SmartMemory enables total server memory optimization, runs at top throughput speed, and is among the most power-efficient memory available. In addition to performance and efficiency, HPE SmartMemory also delivers on reliability. Only the highest-quality DRAM modules are selected from top suppliers. Now more than ever, DRAM quality is critical, as data center trends such as server virtualization, cloud computing, and the use of large database applications have increased the need for higher-capacity memory with greater up-time. HPE SmartMemory undergoes rigorous qualification and testing processes that unlock memory performance features available only with HPE servers.
What's new
- HPE SmartMemory 2933 MT/s memory supported on HPE Gen10 Intel servers
Features
High Performance
HPE DDR4 2933 MT/s SmartMemory provides improvements in bandwidth in comparison to DDR4 2666 MT/s memory modules.
HPE DDR4 SmartMemory delivers improvements in latency at 2933 MT/s in comparison to DDR4 2666 MT/s memory modules.
High Reliability
Hewlett Packard Enterprise tests and qualifies HPE DDR4 SmartMemory modules on all HPE server platforms to deliver the highest level of signal integrity.
HPE DDR4 SmartMemory prevents unnecessary DIMM replacement and reduces server downtime with advanced memory error detection technology.
HPE uses the highest quality materials for its DDR4 server memory, reducing issues that may affect signal integrity and increasing system reliability.
HPE provides server memory that performs above industry standards, enabling customers to increase the performance of their servers without having to increase the amount of memory purchased.
HPE SmartMemory - DDR4 - 8 GB - DIMM 288-pin - 2933 MHz / PC4-23400 - CL21 - 1.2 V - registered - ECC
Has your server been configured with the memory it needs to perform as its role expands over time? HPE Server Memory is designed for SMB and enterprise customers with a significant need for performance and capacity, along with a desire to manage total cost of ownership. HPE SmartMemory enables total server memory optimization, runs at top throughput speed, and is among the most power-efficient memory available. In addition to performance and efficiency, HPE SmartMemory also delivers on reliability. Only the highest-quality DRAM modules are selected from top suppliers. Now more than ever, DRAM quality is critical, as data center trends such as server virtualization, cloud computing, and the use of large database applications have increased the need for higher-capacity memory with greater up-time. HPE SmartMemory undergoes rigorous qualification and testing processes that unlock memory performance features available only with HPE servers.
What's new
- HPE SmartMemory 2933 MT/s memory supported on HPE Gen10 Intel servers
Features
High Performance
HPE DDR4 2933 MT/s SmartMemory provides improvements in bandwidth in comparison to DDR4 2666 MT/s memory modules.
HPE DDR4 SmartMemory delivers improvements in latency at 2933 MT/s in comparison to DDR4 2666 MT/s memory modules.
High Reliability
Hewlett Packard Enterprise tests and qualifies HPE DDR4 SmartMemory modules on all HPE server platforms to deliver the highest level of signal integrity.
HPE DDR4 SmartMemory prevents unnecessary DIMM replacement and reduces server downtime with advanced memory error detection technology.
HPE uses the highest quality materials for its DDR4 server memory, reducing issues that may affect signal integrity and increasing system reliability.
HPE provides server memory that performs above industry standards, enabling customers to increase the performance of their servers without having to increase the amount of memory purchased.
HPE SmartMemory - DDR4 - 32 GB - DIMM 288-pin - 2933 MHz / PC4-23400 - CL21 - 1.2 V - registered - ECC
Has your server been configured with the memory it needs to perform as its role expands over time? HPE Server Memory is designed for SMB and enterprise customers with a significant need for performance and capacity, along with a desire to manage total cost of ownership. HPE SmartMemory enables total server memory optimization, runs at top throughput speed, and is among the most power-efficient memory available. In addition to performance and efficiency, HPE SmartMemory also delivers on reliability. Only the highest-quality DRAM modules are selected from top suppliers. Now more than ever, DRAM quality is critical, as data center trends such as server virtualization, cloud computing, and the use of large database applications have increased the need for higher-capacity memory with greater up-time. HPE SmartMemory undergoes rigorous qualification and testing processes that unlock memory performance features available only with HPE servers.
What's new
- HPE SmartMemory 2933 MT/s memory supported on HPE Gen10 Intel servers
Features
High Performance
HPE DDR4 2933 MT/s SmartMemory provides improvements in bandwidth in comparison to DDR4 2666 MT/s memory modules.
HPE DDR4 SmartMemory delivers improvements in latency at 2933 MT/s in comparison to DDR4 2666 MT/s memory modules.
High Reliability
Hewlett Packard Enterprise tests and qualifies HPE DDR4 SmartMemory modules on all HPE server platforms to deliver the highest level of signal integrity.
HPE DDR4 SmartMemory prevents unnecessary DIMM replacement and reduces server downtime with advanced memory error detection technology.
HPE uses the highest quality materials for its DDR4 server memory, reducing issues that may affect signal integrity and increasing system reliability.
HPE provides server memory that performs above industry standards, enabling customers to increase the performance of their servers without having to increase the amount of memory purchased.
HPE SmartMemory - DDR4 - 64 GB - DIMM 288-pin - 2933 MHz / PC4-23400 - CL21 - 1.2 V - registered - ECC
Has your server been configured with the memory it needs to perform as its role expands over time? HPE Server Memory is designed for SMB and enterprise customers with a significant need for performance and capacity, along with a desire to manage total cost of ownership. HPE SmartMemory enables total server memory optimization, runs at top throughput speed, and is among the most power-efficient memory available. In addition to performance and efficiency, HPE SmartMemory also delivers on reliability. Only the highest-quality DRAM modules are selected from top suppliers. Now more than ever, DRAM quality is critical, as data center trends such as server virtualization, cloud computing, and the use of large database applications have increased the need for higher-capacity memory with greater up-time. HPE SmartMemory undergoes rigorous qualification and testing processes that unlock memory performance features available only with HPE servers.
What's new
- HPE SmartMemory 2933 MT/s memory supported on HPE Gen10 Intel servers
Features
High Performance
HPE DDR4 2933 MT/s SmartMemory provides improvements in bandwidth in comparison to DDR4 2666 MT/s memory modules.
HPE DDR4 SmartMemory delivers improvements in latency at 2933 MT/s in comparison to DDR4 2666 MT/s memory modules.
High Reliability
Hewlett Packard Enterprise tests and qualifies HPE DDR4 SmartMemory modules on all HPE server platforms to deliver the highest level of signal integrity.
HPE DDR4 SmartMemory prevents unnecessary DIMM replacement and reduces server downtime with advanced memory error detection technology.
HPE uses the highest quality materials for its DDR4 server memory, reducing issues that may affect signal integrity and increasing system reliability.
HPE provides server memory that performs above industry standards, enabling customers to increase the performance of their servers without having to increase the amount of memory purchased.
Intel Xeon Gold 6242 - 2.8 GHz - 16-core - 32 threads - 22 MB cache - LGA3647 Socket - for ProLiant DL380 Gen10, DL388 Gen10, SimpliVity 380 Gen10
INTEL® XEON® GOLD PROCESSORS
With support for the higher memory speeds, enhanced memory capacity, and four-socket scalability, Intel® Xeon® Gold processors deliver significant improvement in performance, advanced reliability, and hardware-enhanced security. It is optimized for demanding mainstream data center, multi-cloud compute, and network and storage workloads. With up-to four-socket scalability, it is suitable for an expanded range of workloads.
