Be creative with this rackmount pull-out shelf. Cushioned heavy-duty Hook and Loop Fastener surface will hold hundreds of different gizmos and gadgets.

An internal frame mounted on adjustable elastomer shock absorbers on all eight corners. This revolutionary shocks is designed to control the effects of shock and vibration on three axes. The sway space around the internal frame provides natural air conditioning very important for delicate equipment.

An internal frame mounted on adjustable elastomer shock absorbers on all eight corners. These revolutionary shocks are designed to control the effects of shock and vibration on three axes. The "sway" space around the internal frame provides natural air conditioning, very important for delicate equipment. They are half the weight of the old wooden cases.

The Rolling Shockmount Case series incorporates our black powder coated twist latches with locking loops and low profile injection molded pull handle with a 20 inch deep tough shell. The molded design provides extra stiffness in the lids and sides and allows for secure stacking. Rack depth front to rear rail is 20 inches and each lid is 2-1/4 inches deep. Rack rails are pre-threaded for standard 10-32 hardware and the mounting screws are included. Doors are fully usable even when racks are stacked together. Elastomeric shocks protect even the heaviest of loads. Sliding retractable handle, ambient pressure relief valve, oversized snap-down handles on each side, roller blade wheels, and gasket protected front and rear doors are all standard equipment.

Compound hinge system and field replaceable latches that allows the lid to swing out and completely around to lie flat against the main body of the case, or you can go lid-less with an effortless lift motion and reinstalled with the same ease in seconds.

The front and rear lids are designed to protrude into the base of the case approximately 1" and their unique double wall structure makes them incredibly stiff where this intersection occurs. Making this new generation of shock racks mil-spec sealing characteristics with significantly fewer latches than most competition. This allows for rapid deployment in an up-right configuration -- even when stacked.

The standard depth front to rear rail is 24" and each lid is 4" deep. The new SKB shock-rack system stacks securely with the wheels on or off and this revolutionary design is also the only shock rack that will open front and back while stacked.

Compound hinge system and field replaceable latches that allows the lid to swing out and completely around to lie flat against the main body of the case, or you can go lid-less with an effortless lift motion and reinstalled with the same ease in seconds.

The front and rear lids are designed to protrude into the base of the case approximately 1" and their unique double wall structure makes them incredibly stiff where this intersection occurs. Making this new generation of shock racks mil-spec sealing characteristics with significantly fewer latches than most competition. This allows for rapid deployment in an up-right configuration -- even when stacked.

The standard depth front to rear rail is 24" and each lid is 4" deep. The new SKB shock-rack system stacks securely with the wheels on or off and this revolutionary design is also the only shock rack that will open front and back while stacked.

The Rolling Shockmount Case series incorporates our black powder coated twist latches with locking loops and low profile injection molded pull handle with a 20 inch deep tough shell. The molded design provides extra stiffness in the lids and sides and allows for secure stacking. Rack depth front to rear rail is 20 inches and each lid is 2-1/4 inches deep. Doors are fully usable even when racks are stacked together. Elastomeric shocks protect even the heaviest of loads. Sliding retractable handle, ambient pressure relief valve, oversized snap-down handles on each side, roller blade wheels, and gasket protected front and rear doors are all standard equipment.

SKB 3I 7" Deep Mil-Std Waterproof Case with Cubed Foam is Injection Molded Mil-Standard Waterproof Case is molded of ultra high-strength polypropylene copolymer resin, featuring a gasketed, water and dust tight, submersible design that is resistant to corrosion and impact damage.

These Mil-Standard cases were designed to meet the most demanding military specifications. They are roto-molded for strength and durability, airtight and water proof with solid stainless steel latches and hinges that will withstand the most demanding shipping conditions. The 3R Mil-Std cases are molded of (LLDPE) polyethylene impact resistant/UV stabilized material and meet or exceed MIL-STD 810 and MIL-C-4150J specifications.

The Caster Kit is designed to fit our 3R Series Roto Molded Military Standard Cases, is a high performance add-on caster kit made to withstand the toughest environments.

Compound hinge system and field replaceable latches that allows the lid to swing out and completely around to lie flat against the main body of the case, or you can go lid less with an effortless lift motion and reinstalled with the same ease in seconds. The front and rear lids are designed to protrude into the base of the case approximately 1" and their unique double wall structure makes them incredibly stiff where this intersection occurs. Making this new generation of shock racks mil-spec sealing characteristics with significantly fewer latches than most competition. This allows for rapid deployment in an up-right configuration, even when stacked. The standard depth front to rear rail is 24" and each lid is 4" deep. The new SKB shock-rack system stacks securely with the wheels on or off and this revolutionary design is also the only shock rack that will open front and back while stacked.

An internal frame mounted on adjustable elastomer shock absorbers on all eight corners. These revolutionary shocks are designed to control the effects of shock and vibration on three axes. The "sway" space around the internal frame provides natural air conditioning, very important for delicate equipment. They are half the weight of the old wooden cases.

This SKB 8 unit 30" deep rotomolded shock rack is the perfect solution for customers needing to install data or communications equipment requiring a full depth, standard 19" width rack system using standard 10/32" threaded rail holes. IMPORTANT: customers installing Dell, HP or other servers utilizing "Versa-rail" "Rapid-rail" , or similar pull-out systems should purchase the SKB 28" shock rack 3SKB- R908U28 with ARC's: adjustable rail conversion system.

Standard features of the 30" shocks racks include our patented compound hinge door system that allows the case lid to swing out and lie flat against the main body of the case; even when stacked. The case doors can also be easily removed or reinstalled within seconds. The front and rear lids are designed to protrude into the base of the case approximately 1" and their unique double wall structure makes them incredibly stiff giving this new generation of shock racks mil-spec sealing characteristics with significantly fewer latches than most competition. These racks are stakable with or without casters. Other features include black powder coated stainless steel latches, 4" removable casters, pressure relief valve, gasketed doors and eight HM-245 elastomeric shock mounts providing a load range of 40 to 150 lbs. (this can be increased to 300 lbs by adding an additional set of shock mounts).

The re-designed Roto-molded Shallow Rack Cases meet the needs of musicians and pro audio engineers. The new 1SKB-R4S now has a full front and rear cover instead of a rear access panel for easy access. Both doors have a rubber gasket to keep water out of the case.

The Shallow Racks are roto-molded for strength and durability and feature a new exterior design with interlocking capabilities, recessed steel, Mil-Spec black twist latches, shock absorbing rubber feet and new heavy-duty flush handles. With the addition of rear rack rails and the new cover design, the depth on the new Roto-molded Shallow Racks has been extended to 10.7" from front to rear rail. Gear can now be mounted front and rear with the supplied rackmount clips.