The CyberData SIP Loudspeaker Amplifier is a Powered over Ethernet (PoE 802.3af or 802.3at) and VoIP paging device that provides an easy method for implementing an IP-based overhead paging system for both new and legacy installations.

The CyberData SIP Speaker is the latest in IP technology. This Power over Ethernet (PoE 802.3af/802.3at) VoIP mass notification device has network-controlled speaker volume, simultaneous SIP and priority-based Multicast streaming, and integrates with both the CyberData Wall Mount and the CyberData Wall Mount Clock Kit. The speaker is compatible with most SIP-based IP PBX. In a non SiP environment, the speaker is capable of broadcasting audio through Multicast. Its small footprint and low height allows the speaker to be discreetly mounted almost anywhere.

The CyberData Singlewire InformaCast® Talk-Back Speaker enables two-way conversations using the Singlewire InformaCast® Talk Back application running on the phone. The Talk-Back Speaker easily connects into local area networks with a single CAT5/6 cable from your PoE switch. Its small footprint allows the speaker to be mounted almost anywhere with multiple mounting options available.

The new CyberData SIP-enabled Paging Amplifier provides an easy method for implementing an IP-based overhead paging system for both new and legacy installations.

Now with up to 9 user-stored messages, the Amplifier provides direct drive of up two 8 Ohm horn speakers.

The interface is compatible with most SIP-based IP PBX servers that comply with the SIP RFC 3261. For non-SIP environments, the Paging Amplifier can be configured to listen to multicast address and port number combinations to form paging zones.

The Auxiliary RGB Strobe Kit comes with a 1-meter cable that enables the user to connect to a supported CyberData IP endpoint.

Power and signaling for the strobe comes from the attached CyberData Endpoint.

Setup of the strobe's blink rates and brightness are through the web interface of the attached CyberData IP endpoint.

When installed, the wall-mounted SIP RGB Strobe operates as a visual alerting device. The device can be set up as part of a ring group (call group) with the Strobe engaged as notification of incoming calls. The SIP RGB Strobe may also be activated by being part of a Multicast group. When audio is detected on a specific Multicast address and port, the strobe will activate.

Through a web page setup, you can have the SIP Strobe respond to message waiting signals by blinking. When the message has been heard, the strobe stops blinking.

Multiple colors, Blink rate and brightness can be selected for each of the different activation methods Users may also use CyberData's HTTP command set to directly access the strobe's functions.

Note: Support of SIP RGB Strobe with Syn-Apps devices via multicast mode.

When installed, the wall-mounted Singlewire RGB Strobe operates as a visual alerting device.In Singlewire mode, when an audio page is sent to the strobe, a specific color, brightness and blink rate can be selected based on the priority of the page. The Singlewire RGB Strobe supports 10 Singlewire priority levels.

In the SIP mode, the device can be set up as part of a ring group (call group) with the Strobe's specific scene engaged as notification of incoming calls. Through a web page setup, you can have the Strobe respond to message waiting signals by blinking. When the message has been heard, the strobe stops blinking.

The Singlewire RGB Strobe may also be activated by being part of a Multicast group. When audio is detected on a specific Multicast address and port, the strobe will activate.

Users may also use CyberData's HTTP command set to directly access the strobe's functions.

The CyberData SIP-enabled h.264 Video Outdoor Intercom is perfect for secure access settings requiring video and two-way communication. With excellent color and low light capability, the CyberData SIP-enabled h.264 Video intercom can increase the security of any VoIP installation.

The Weather Shroud can be purchased separately for even greater weather protection. Based on one of our most popular devices, the new Video Outdoor Intercom can be installed in nursing care facilities, schools and universities, daycare facilities, retail establishments, highway tolls, needing color video and clear two way audio.

The CyberData SIP-enabled h.264 Video Outdoor Intercom with Keypad is perfect for secure access settings requiring video and two-way communication. With excellent color and low light capability, the CyberData SIP-enabled h.264 Video intercom can increase the security of any VoIP installation.

The Weather Shroud can be purchased separately for even greater weather protection. Based on one of our most popular devices, the new Video Outdoor Intercom with Keypad can be installed in nursing care facilities, schools and universities, daycare facilities, retail establishments, highway tolls, needing color video and clear two way audio.

CyberData, the leader in PoweredUSB technology, offers a set of service/repair devices designed to help diagnose and validate PoweredUSB ports. Each specific test plug has a voltage detector circuitry that detects the proper voltage supplied by the Host PoweredUSB port. If the voltage is within + or - 10% then the light on the test plug will illuminate. Standard USB devices can also be connected to validate the USB communications.

The new Singlewire InformaCast IP66 Outdoor Horn provides an easy method for implementing a loud IP-based overhead paging system for loud areas, warehouses, manufacturing areas, and outdoor areas. Now with up to 9 user-stored messages. The interface is compatible with most SIP-based IP PBX servers that comply with the SIP RFC 3261. For non-SIP environments, the speaker can be configured to listen to multicast address and port number combinations to form paging zones.

The new CyberData SIP IP66 Outdoor Horn provides an easy method for implementing a loud IP-based overhead paging system for loud areas, warehouses, manufacturing areas, and outdoor areas.

Now with up to 9 user-stored messages. The interface is compatible with most SIP-based IP PBX servers that comply with the SIP RFC 3261. For non-SIP environments, the speaker can be configured to listen to multicast address and port number combinations to form paging zones.

The CyberData Multicast Microphone is a device that allows the user, while pressing the "Page" button, to broadcast a live or buffered announcements directly to VoIP audio endpoints that support Multicast. This PoE-powered product is perfect for immediate live paging in schools, retail stores and manufacturing environments. In an echo sensitive environment, the delayed page support allows the user to record a message while the page button is depressed. Once the page button is released, the page will be sent.