The new CyberData Singlewire Paging Adapter (SPA) is for use with Singlewire's paging and emergency notification software InformaCast® or InformaCast CK.

The Singlewire Paging Adapter provides a direct connection to legacy analog paging systems enabling InformaCast paging events to be broadcast. The on-board relay can be controlled using InformaCast GPI/O commands or can be set to activate when a page has begun.

The SPA supports a Line-In input for playing MOH from a remote source.

The CyberData SIP Paging Adapter is a VoIP endpoint that interfaces analog paging systems with SIP and Multicast-based audio sources. The SPA (SIP Paging Adapter) can be configured to support two separate SIP extensions. SIP extension one passes audio through to the analog output spoken from the caller's handset. When called, SIP extension two plays a bell audio that can be used as a night ringer when configured in a night ring group. The SPA supports up to 9 user-loadable messages that can be played by a DTMF command. The SPA supports a line-In input for playing MOH.

The CyberData 3-Port Gigabit Ethernet Switch enables users of a PC to split a single Gigabit Ethernet port into two Gigabit Ethernet ports. The power for the switch is supplied by the PC's USB port.

The Weather Shroud is available for use with our SIP Outdoor Intercom and the Singlewire InformaCast^® Outdoor intercom, delivering even greater weather protection. Fits the following devices: 011186, 011309, 011433, 011425 and 011426

Newly designed with a faster processor allowing for more capabilities, the CyberData SIP-enabled VoIP V3 Emergency Intercom is perfect for settings where either an emergency panic button or two-way priority communications are required.

The CyberData 2-Port PoE Gigabit switch is designed to expand a single PoE network connection into one or two PoE network ports.

Pass through PoE power

The CyberData 2-Port PoE Gigabit switch is powered from a single 802.3at or 802.3af network switch and passes that power through to one or two of the downstream switch ports.

The CyberData SIP Outdoor Intercom delivers two-way communication and secure access control for your VoIP phone system. These devices are perfect for settings such as commercial/residential facilities, schools and universities, retail establishments, warehouse and manufacturing plants, SMB, parking garages, shipyards and so much more.

CyberData's SIP enabled VoIP products are compatible with a vast majority of VoIP systems including SBCs, Gateways, and phone systems both on-premise or cloud-based.

Now up to 38% brighter and upgraded to an IP66 rating, the Outdoor Auxiliary RGB (Multi-Color) Strobe Kit operates as a powerful and highly effective visual alerting device. This cost-effective, user-installable option can enhance the notification capabilities of the latest line of CyberData VoIP products. The Strobe Kit comes with a 3 meter (9.8 ft) cable that enables the user to connect to a supported CyberData IP endpoint. Power and signaling for the Strobe also comes from the attached CyberData endpoint. Setup of the Strobe's blink rates and brightness are configured through the web interface of the attached CyberData IP endpoint

Features

• Meets ADA requirements for telephony signaling and notification
• Compatible with CyberData InformaCast enabled devices
• When connected to a CyberData IP Endpoint, this device supports
• Multicast activation
• For each activation, the user may choose multiple colors, blink rates, and brightness levels
• Mailbox "message waiting" indication
• HTTPS or HTTP web based configuration from the IP endpoint. HTTPS is enabled by default
• HTTP Command Interface

The CyberData Auxiliary Analog Speaker is an option for the CyberData SIP Speaker to extend the coverage area.

The CyberData VoIP SIP/Multicast Wall Mount Speaker is a cost-effective Power-over-Ethernet (PoE 802.3af) and Voice-over-IP (VoIP) public address indoor speaker that connects into existing local area networks through a single Ethernet cable.

The speaker plays multicast messages, independent of the SIP environment. The device's streamlined case and included mounting hardware offers an easy installation in almost any environment.

CyberData's SIP-enabled VoIP products are compatible with a vast majority of VoIP systems including SBCs, Gateways, and phone systems both on-premise or cloud-based.

Key Features

• Simultaneous SIP and multicast
• Paging prioritisation
• Can receive pages directly from Poly phones as well as other devices that can send standard multicast
• Loud/Night Ringer function - second SIP extension
• Support for 10 multicast paging groups
• Network-adjustable speaker volume
• High-efficiency speaker driver
• Small footprint
• TLS 1.2 (includes mutual authentication) and SRTP enhanced security for IP Endpoints in a local or
• cloud-based environment
• Autoprovisioning via HTTP, HTTPS, or TFTP
• HTTPS or HTTP web-based configuration. HTTPS is enabled by default
• 802.11q VLAN tagging
• Configurable event generation for device health and status monitoring
• Web-based upgradeable firmware
• Support for multiple SIP servers for redundancy

The CyberData VoIP SIP/Multicast Ceiling Mount Speaker is a highly cost-effective Power-over-Ethernet (PoE 802.3af) and Voice-over-IP (VoIP) public address indoor speaker that easily connects into existing local area networks with a single Ethernet cable connection.

The speaker plays multicast messages, independent of the SIP environment. The device's streamlined case and included mounting hardware offers an easy installation in almost any environment.

CyberData's SIP enabled VoIP products are compatible with a vast majority of VoIP systems including SBCs, Gateways, https://www.cyberdata.net/pages/connecting-to-ip-pbx-servers and phone systems both on-premise or cloud-based. The IP Endpoint Company

Features

• simultaneous SIP and multicast
• Paging prioritization
• Can receive pages directly from Poly phones as well as other devices that can send standard multicast
• Loud/Night Ringer function - second SIP extension
• Support for 10 multicast paging groups
• Network-adjustable speaker volume
• High efficiency speaker driver
• Small footprint
• TLS 1.2 (includes mutual authentication) and SRTP enhanced security for IP Endpoints in a local or cloud-based environment
• Autoprovisioning via HTTP, HTTPS, or TFTP
• HTTPS or HTTP web based configuration. HTTPS is enabled by default
• 802.11q VLAN tagging
• Configurable event generation for device health and status monitoring
• Web-based upgradeable firmware
• Support for multiple SIP servers for redundancy

The SIP-enabled IP Call Button is a Power over Ethernet (PoE 802.3af) device that can be mounted under a desk or in a discrete location. If an event takes place, the user depresses the button. The Call Button automatically makes a call to a pre-set phone or extension number. When the called number answers, the Call Button plays and repeats a stored audio file. This stored audio file is uploaded by the administrator to meet the needs to the installed location.

The CyberData WiFi Alert Button provides an easy and reliable device that, when pressed, will interact with the designated IP server to generate an appropriate mass notification response.

The WiFi Alert Button is designed to operate in different environments. Paired with the CyberData SIP Paging Server with Bell Scheduler (part #011146), the Button, when activated, will generate an event which triggers the SIP Paging Server to produce the configured notification response.

In an InformaCast environment, the Button sends a message to the InformaCast Server which then creates an event in the InformaCast software to generate the mass notification response.

The device can be mounted on a wall or discreetly under a desk. Powered by an external +5V supply - such as a cell phone charger - and with a 4-hour back-up battery, the CyberData WiFi Alert Button is a key component to your emergency notification solution.

Features

• A network of up to 100 Buttons can be configured with a single CyberData SIP Paging Server or InformaCast Server.
• Large lighted color button
• Adjustable button brightness, blink rates and activation time
• Adjustable buzzer
• +5V power from USB wall charger with 3 ft cable (included)
• Built-in battery backup allows up to 4 hours of uninterrupted operation
• 802.11 b/g/n WiFi support
• WPA2 PSK
• WiFi Configuration/Discovery Tool
• Network battery diagnostic monitoring
• Over-the-air upgradeable firmware