Power Up the Next Generation Hardware

Smart BM3 80 PLUS Bronze (550W/650W/750W/850W) certified semi modular PSU is designed to meet ATX 3.0 standards, it also comes with one PCIe Gen 5.0 (12VHPWR) connector to support modern graphics cards. With an ample 5-year warranty, the Smart BM3 series is able to satisfy the market, where value-oriented users are looking for a new power supply with all the latest features.

Fully Compatible with Intel ATX 3.0 Standards

Smart BM3 series is fully compatible with Intel ATX 3.0 Specifications which supports up to 200% power excursion, reaches 60% low load efficiency and complies with required power supply timing standards.

PCIe Gen 5.0 Ready

Smart BM3 Bronze series comes with a 16-pin connector to offer powerful and stable performance allowing the PSU to natively run next-generation GPUs.

The wattage marked on the 12VHPWR's connector is the recommended wattage. (Ref. Intel design guideline)

The native 16-pin (12VHPWR) PCIe connector of the Smart BM3 650W can deliver up to 300W for PCIe 5.0 graphics cards.

Made to Comply with the Latest Graphics Cards

As the power consumption of graphics cards increase, so has their demand for power. The Smart BM3 series is designed to support NVIDIA and AMD graphics cards, it supports 8-pin PCIe cables for AMD graphics cards & entry RTX 40 series graphics cards, it also comes with a 1 x 16-pin connector for RTX 40 series cards that need a PCIe Gen 5.0 connector, ready to supply the graphics cards according to their different ways of connections.

Be Smart, Stay Quiet

Featuring a 120mm FDB fan to deliver excellent airflow. Furthermore, with the Smart Zero Fan function the fan will not spin until the load exceeds 20% of the power supply, minimizing undesired noise.

High Quality Japanese 105°C/221°F Main Electrolytic Capacitor

High quality Japanese main electrolytic capacitor greatly improves the power supplies durability and ensures the Smart BM3 series is stable and reliable.

High Amperage Single +12V Rail & DC to DC Design

Powerful single +12V rail can properly deliver the power you need for the best compatibility. The use of LLC and DC to DC circuit design provides very stable operation and enhanced voltage regulation.

Built-in Industrial Grade Protection

To protect the hardware, Smart BM3 is built with industry grade protections: OCP(Over Current Protection), OVP (Over Voltage Protection), UVP(Under Voltage Protection), OPP(Over Power Protection), SCP(Short Circuit Protection), OTP(Over Temperature Protection).

Semi Modular Flat Cable Design

Soft flat black cables come with sleeve cabling, designed to make cable installation an easy task while fully powering the system at optimal voltages.

80 PLUS Bronze-Certified and Intel C6/C7 States Ready

Smart BM3 Bronze series saves energy through its high energy efficiency up to 85% and is certified to 80 PLUS® Bronze. It has been optimized to work with all generations of Intel's processors to achieve maximum energy saving.

More from the Manufacturer

Power Up the Next Generation Hardware

Smart BM3 80 PLUS Bronze (550W/650W/750W/850W) certified semi modular PSU is designed to meet ATX 3.0 standards, it also comes with one PCIe Gen 5.0 (12VHPWR) connector to support modern graphics cards. With an ample 5-year warranty, the Smart BM3 series is able to satisfy the market, where value-oriented users are looking for a new power supply with all the latest features.

Fully Compatible with Intel ATX 3.0 Standards

Smart BM3 series is fully compatible with Intel ATX 3.0 Specifications which supports up to 200% power excursion, reaches 60% low load efficiency and complies with required power supply timing standards.

PCIe Gen 5.0 Ready

Smart BM3 Bronze series comes with a 16-pin connector to offer powerful and stable performance allowing the PSU to natively run next-generation GPUs.

The wattage marked on the 12VHPWR's connector is the recommended wattage. (Ref. Intel design guideline)

The native 16-pin (12VHPWR) PCIe connector of the Smart BM3 650W can deliver up to 300W for PCIe 5.0 graphics cards.

Made to Comply with the Latest Graphics Cards

As the power consumption of graphics cards increase, so has their demand for power. The Smart BM3 series is designed to support NVIDIA and AMD graphics cards, it supports 8-pin PCIe cables for AMD graphics cards & entry RTX 40 series graphics cards, it also comes with a 1 x 16-pin connector for RTX 40 series cards that need a PCIe Gen 5.0 connector, ready to supply the graphics cards according to their different ways of connections.

Be Smart, Stay Quiet

Featuring a 120mm FDB fan to deliver excellent airflow. Furthermore, with the Smart Zero Fan function the fan will not spin until the load exceeds 20% of the power supply, minimizing undesired noise.

High Quality Japanese 105°C/221°F Main Electrolytic Capacitor

High quality Japanese main electrolytic capacitor greatly improves the power supplies durability and ensures the Smart BM3 series is stable and reliable.

High Amperage Single +12V Rail & DC to DC Design

Powerful single +12V rail can properly deliver the power you need for the best compatibility. The use of LLC and DC to DC circuit design provides very stable operation and enhanced voltage regulation.

Built-in Industrial Grade Protection

To protect the hardware, Smart BM3 is built with industry grade protections: OCP(Over Current Protection), OVP (Over Voltage Protection), UVP(Under Voltage Protection), OPP(Over Power Protection), SCP(Short Circuit Protection), OTP(Over Temperature Protection).

Semi Modular Flat Cable Design

Soft flat black cables come with sleeve cabling, designed to make cable installation an easy task while fully powering the system at optimal voltages.

80 PLUS Bronze-Certified and Intel C6/C7 States Ready

Smart BM3 Bronze series saves energy through its high energy efficiency up to 85% and is certified to 80 PLUS® Bronze. It has been optimized to work with all generations of Intel's processors to achieve maximum energy saving.

More from the Manufacturer

TOUGHAIR 710 Black is constructed with a Dual-Tower Dual Fan Design for the latest Intel and AMD CPUs, allowing the two 140mm fans to perform the best possible cooling and kicking the TOUGHAIR series up a notch for the latest CPUs.

Keep to the Shadows

If you like the classical vibe without RGB, look closer!

The hint of color within the shadow is our TOUGHAIR 710 Black, with a new color palette for you to choose from. Pairing with all black color components, you can build a toned-down look that sure to draw everyone's attention.

Double Them All

TOUGHAIR 710 Black is designed for the latest Intel and AMD CPUs, which needs the best possible cooling solution, so we doubled everything and came up with the Dual-Tower Dual Fan Design; it allows the two 140mm fans to push air cooling performance even further, exceeding all previous TOUGHAIR series models.

Lower Noise but More Powerful

TOUGHAIR 710 Black leverages the TOUGHFAN 14 design, so the fan can provide an airflow of 81.96 CFM and a static pressure of 1.81 mm-H2O while keeping the noise level at 23.9 dB-A. So you won't have to choose between cooling power and acoustics.

Larger Heat Dissipation Area

We have also extended the fin stack so there's more heat dissipation area to ensure the best cooling result. Along with the significant asymmetric fin structure of the TOUGHAIR Series, no doubt that if you're looking for a boost on your air cooler, TOUGHAIR 710 Black won't let you down.

The Ultimate Cooling Solution

TOUGHAIR 710 Black features a copper base with anti-corrosive nickel plating that covers all seven black Ø6mm U-shape copper heat pipes, resulting in even heat distribution from the heat source, providing exceptional heat dissipation even with high-performance CPUs.

Flexible Adjustment of Fan Position

By adjusting the fan position, you can easily match the height of the memory and enjoy unlimited cooling performance.

Any CPU Can Be the Right CPU

TOUGHAIR Series are designed to fit Intel and AMD sockets including the following models:

Intel? LGA 2066/2011/2011-3/1700/1200/1156/1155/1151/115

AMD? AM5/AM4

UX200 SE ARGB Lighting CPU Cooler comes with high air flow blades and U-shape copper heat pipes. Built-in ARGB LEDs delivers vibrant lighting effects that also supports motherboard sync. Compatible with universal Intel and AMD sockets.

16.8 Million TRUE RGB COLOR

Features 15 high lumen addressable LEDs with 16.8 million colors, UX200 SE White gives you a vivid RGB lighting experience. Enjoy reliable cooling performance and magnificent visual effects with UX200 SE White.

HIGH VOLUME AIRFLOW DESIGN

The fan blades are built to generate a large volume of air passing through the aluminum heatsink and U-shaped copper heat pipes at any angle for steady air flow.

RELIABLE HYDRAULIC BEARING

The hydraulic bearing self-lubricates with a high quality, friction-reducing substance that lowers operation noise and enhance thermal efficiency. The seal cap prevents leakage of the lubricant and extends the lifespan of the unit.

EASY TO INSTALL

The mounting kit offers hassle-free installation. UX200 SE includes an all-in-one back-plate which is compatible with all the latest Intel and AMD CPU sockets.

Intel: : LGA 1700/1200/1156/1155/1151/1150

AMD: AM4/FM2/FM1/AM3+/AM3/AM2+/AM2

One Button to Your Desired Color

By pressing the RGB lighting button, the fan color can be switched among variants including Pulse Red/Green/Blue/Yellow/Purple/Light Blue/White, 256 Color RGB Cycle, Solid Red/Green/Blue/Yellow/Purple/Light Blue/ White, and a LED Off mode. The fan is also constructed with a built-in memory function, saving the color applied and insuring the same color selection every time you boot your PC.

10 LED Light Bulbs

The Smart RGB Series adopts 10 LED light bulbs to enhance the brightness and spawn an advanced user experience in the world of illumination.

Ultra Quiet 120mm Fan

SMART RGB series adopt 120mm cooling fan with intelligent RPM control guarantees excellent cool performance and silent operation.

High Amperage Single +12V Rail

Smart RGB 500W White is equipped with a powerful single +12V rail, eliminating the limitations caused by voltage distributions, delivering the power your CPU and VGA demand in any situations. Providing the best compatibility, conversion efficiency and stable voltage output.

Multiple Connectors

Smart RGB offers cable selection for users while powering the system at an advantageous voltage. Further, the multiple connectors make cable installation an easy task

80 PLUS 230V Standard Certified and Kaby Lake Ready

Deliver up to 87% efficiency under real world load conditions to promise low power losses. Additionally, Smart RGB Series has been optimized to work with Intel's latest, seventh-generation Kabylake processors to achieve maximum energy saving.

RGB Lighting Provides Best Aesthetics for All Chassis

Smart RGB Series is the best idea for users to go with when they are looking for an RGB PSU which permits remarkable functionality and aesthetics in all cases, especially Open Frame or Tower cases.

No matter the build, We've got you covered | New Version, New Design

TH V2 ARGB was given an industrial look to freshen up the 360-degree rotational cap. Adding Infinity Mirror Lighting to this series can bring more diverse visual effects to the build and gives more depth than it looks.

The TH V2 ARGB Series is now ready for all types of builds; the series has three 120mm fan models, including the TH 120/ 240/ 360 V2 ARGB, and two 140mm fan models, including TH 280/ 420 V2 ARGB.

Enhanced Cooling Surface With A Compact Design

The TH V2 ARGB Series has a 27mm slim radiator with a thickened 20mm copper chamber, ensuring the same easy installation but with even better cooling performance.

Less Cables, Less Mess

The new cable-integrated daisy-chain design allows the fans to be directly connected, so it minimizes demands of 4-pin PWM and 3-pin ARGB ports on your motherboard and shortens the cable length between the fans. We've also included one 900mm PWM cables and one 900mm ARGB cable for you to easily manage your cables while assembling your build.

Keeping Your Cables in Place

You might have experienced easily detached 5V ARGB cables when you assemble your builds. Worry not; this 5V ARGB Connector Clip can guarantee that the cables are correctly connected and won't get loose in unexpected conditions.

Keep it COLD with Copper

The high-performance copper base plate accelerates heat conductivity. The high-quality and reliable pump enables maximum water circulation, keeping the copper plate continuously cool. The low evaporation tube effectively decreases the loss of coolant; therefore, no refill is required.

Any CPU Can Be the Right CPU

The package includes brackets for the latest Intel and AMD CPU sockets to be compatible with the most modern CPU platforms, including the latest Intel LGA1700 and AMD AM5 CPUs.

Sync with Motherboard RGB Software

Designed to synchronize with ASUS Aura Sync, GIGABYTE RGB Fusion, MSI Mystic Light Sync, and ASRock Polychrome. It supports motherboards with a 5V addressable RGB header, allowing you to control the lights directly from the software mentioned above without installing any extra lighting software or controllers. For more details, please visit ASUS, GIGABYTE, MSI, and ASRock official websites.

More from the Manufacturer

No matter the build, We've got you covered

The TH V2 Ultra ARGB Series covers various types of builds; the series has two 120mm fan models, including the TH 240/ 360 V2 Ultra ARGB, and two 140mm fan models, including TH 280/ 420 V2 Ultra ARGB.

New Design, Same Quality

TH V2 Ultra ARGB was given an industrial look to freshen up the 2.1" LCD Display. With its 480*480 high resolution, you can easily show off 16.8M color videos or photos.

Personalize Your LCD Display

The TH V2 Ultra LCD Display is highly customizable, from presenting real-time information to playing JPG, GIF, PNG, MP4, MOV, and AVI files or even showing local time and weather information on the display; it can all bring great visual aesthetics to your build.

Sync with CT140 ARGB Fans

Developed from the CT fan series, this model uses two CT140 ARGB fans with enhanced fan speed, and you can also match with some of our chassis' pre-installed fans to unify your fans in your build!

These fans have 1800 RPM and provide an 84.32 CFM airflow with 3.02 mm-H2O static pressure while maintaining 34.7 dB-A noise levels.

Enhanced Cooling Surface With A Compact Design

The TH V2 Ultra ARGB Series has a 27mm slim radiator with a thickened 20mm copper chamber, ensuring the same easy installation but with even better cooling performance.

Less Cable, Less Mess

The new cable-integrated daisy-chain design allows the fans to be directly connected, so it minimizes demands of 4-pin PWM and 3-pin ARGB ports on your motherboard and shortens the cable length between the fans. We've also included one 900mm PWM cables and one 900mm ARGB cables for you to easily manage your cables while assembling your build.

Keeping Your Cables in Place

You might have experienced easily detached 5V ARGB cables when you assemble your builds. Worry not; this 5V ARGB Connector Clip can guarantee that the cables are correctly connected and won't get loose in unexpected conditions.

Keep it COLD with Copper

The high-performance copper base plate accelerates heat conductivity. The high-quality and reliable pump enables maximum water circulation, keeping the copper plate continuously cool. The low evaporation tube effectively decreases the loss of coolant; therefore, no refill is required.

Fully Customizable with TT RGB Plus 2.0

Monitor frequency and real-time temperature directly from the 2.1" LCD display, or customize start-up and standby screens by uploading images or GIFs to add extra flair with the TT RGB Plus 2.0 software.

Any CPU Can Be the Right CPU

The package includes brackets for the latest Intel and AMD CPU sockets to be compatible with the most modern CPU platforms, including the latest Intel LGA1700 and AMD AM5 CPUs.

No matter the build, We've got you covered

The TH V2 Ultra ARGB Series covers various types of builds; the series has two 120mm fan models, including the TH 240/ 360 V2 Ultra ARGB, and two 140mm fan models, including TH 280/ 420 V2 Ultra ARGB.

New Design, Same Quality

TH V2 Ultra ARGB was given an industrial look to freshen up the 2.1" LCD Display. With its 480*480 high resolution, you can easily show off 16.8M color videos or photos.

Personalize Your LCD Display

The TH V2 Ultra LCD Display is highly customizable, from presenting real-time information to playing JPG, GIF, PNG, MP4, MOV, and AVI files or even showing local time and weather information on the display; it can all bring great visual aesthetics to your build.

Sync with CT120 ARGB Fans

Utilizing the CT120 ARGB Fans on this model, not only you can match up some of our chassis' pre-installed fans, but you can unify your fans with your build!

The CT120 ARGB provides an 57.05 CFM air flow with 2.23 mm-H2O static pressure while maintaining 25.8 dB-A noise levels.

Enhanced Cooling Surface With A Compact Design

The TH V2 Ultra ARGB Series has a 27mm slim radiator with a thickened 20mm copper chamber, ensuring the same easy installation but with even better cooling performance.

Less Cable, Less Mess

The new cable-integrated daisy-chain design allows the fans to be directly connected, so it minimizes demands of 4-pin PWM and 3-pin ARGB ports on your motherboard and shortens the cable length between the fans. We've also included one 900mm PWM cables and one 900mm ARGB cable for you to easily manage your cables while assembling your build.

Keeping Your Cables in Place

You might have experienced easily detached 5V ARGB cables when you assemble your builds. Worry not; this 5V ARGB Connector Clip can guarantee that the cables are correctly connected and won't get loose in unexpected conditions.

Keep it COLD with Copper

The high-performance copper base plate accelerates heat conductivity. The high-quality and reliable pump enables maximum water circulation, keeping the copper plate continuously cool. The low evaporation tube effectively decreases the loss of coolant; therefore, no refill is required.

Fully Customizable with TT RGB Plus 2.0

Monitor frequency and real-time temperature directly from the 2.1" LCD display, or customize start-up and standby screens by uploading images or GIFs to add extra flair with the TT RGB Plus 2.0 software.

Any CPU Can Be the Right CPU

The package includes brackets for the latest Intel and AMD CPU sockets to be compatible with the most modern CPU platforms, including the latest Intel LGA1700 and AMD AM5 CPUs.

More from the Manufacturer

No matter the build, We've got you covered

The TH V2 Ultra ARGB Series covers various types of builds; the series has two 120mm fan models, including the TH 240/ 360 V2 Ultra ARGB, and two 140mm fan models, including TH 280/ 420 V2 Ultra ARGB.

New Design, Same Quality

TH V2 Ultra ARGB was given an industrial look to freshen up the 2.1" LCD Display. With its 480*480 high resolution, you can easily show off 16.8M color videos or photos.

Personalize Your LCD Display

The TH V2 Ultra LCD Display is highly customizable, from presenting real-time information to playing JPG, GIF, PNG, MP4, MOV, and AVI files or even showing local time and weather information on the display; it can all bring great visual aesthetics to your build.

Sync with CT140 ARGB Fans

Developed from the CT fan series, this model uses three CT140 ARGB fans with enhanced fan speed, and you can also match with some of our chassis' pre-installed fans to unify your fans in your build!

These fans have 1800 RPM and provide an 84.32 CFM airflow with 3.02 mm-H2O static pressure while maintaining 34.7 dB-A noise levels.

Enhanced Cooling Surface With A Compact Design

The TH V2 Ultra ARGB Series has a 27mm slim radiator with a thickened 20mm copper chamber, ensuring the same easy installation but with even better cooling performance.

Less Cable, Less Mess

The new cable-integrated daisy-chain design allows the fans to be directly connected, so it minimizes demands of 4-pin PWM and 3-pin ARGB ports on your motherboard and shortens the cable length between the fans. We've also included one 900mm PWM cables and one 900mm ARGB cable for you to easily manage your cables while assembling your build.

Keeping Your Cables in Place

You might have experienced easily detached 5V ARGB cables when you assemble your builds. Worry not; this 5V ARGB Connector Clip can guarantee that the cables are correctly connected and won't get loose in unexpected conditions.

Keep it COLD with Copper

The high-performance copper base plate accelerates heat conductivity. The high-quality and reliable pump enables maximum water circulation, keeping the copper plate continuously cool. The low evaporation tube effectively decreases the loss of coolant; therefore, no refill is required.

Fully Customizable with TT RGB Plus 2.0

Monitor frequency and real-time temperature directly from the 2.1" LCD display, or customize start-up and standby screens by uploading images or GIFs to add extra flair with the TT RGB Plus 2.0 software.

Any CPU Can Be the Right CPU

The package includes brackets for the latest Intel and AMD CPU sockets to be compatible with the most modern CPU platforms, including the latest Intel LGA1700 and AMD AM5 CPUs.

No matter the build, We've got you covered

The TH V2 ARGB Series is now ready for all types of builds; the series has three 120mm fan models, including the TH 120/ 240/ 360 V2 ARGB, and two 140mm fan models, including TH 280/ 420 V2 ARGB.

New Version, New Design

TH V2 ARGB was given an industrial look to freshen up the 360-degree rotational cap. Adding Infinity Mirror Lighting to this series can bring more diverse visual effects to the build and gives more depth than it looks.

Sync with CT140 ARGB Fans

Developed from the CT fan series, this model uses two CT140 ARGB fans with enhanced fan speed, and you can also match with some of our chassis' pre-installed fans to unify your fans in your build!

These fans have 1800 RPM and provide an 84.32 CFM airflow with 3.02 mm-H2O static pressure while maintaining 34.7 dB-A noise levels.

Enhanced Cooling Surface With A Compact Design

The TH V2 ARGB Series has a 27mm slim radiator with a thickened 20mm copper chamber, ensuring the same easy installation but with even better cooling performance.

Less Cable, Less Mess

The new cable-integrated daisy-chain design allows the fans to be directly connected, so it minimizes demands of 4-pin PWM and 3-pin ARGB ports on your motherboard and shortens the cable length between the fans. We've also included one 900mm PWM cables and one 900mm ARGB cable for you to easily manage your cables while assembling your build.

Keeping Your Cables in Place

You might have experienced easily detached 5V ARGB cables when you assemble your builds. Worry not; this 5V ARGB Connector Clip can guarantee that the cables are correctly connected and won't get loose in unexpected conditions.

Keep it COLD with Copper

The high-performance copper base plate accelerates heat conductivity. The high-quality and reliable pump enables maximum water circulation, keeping the copper plate continuously cool. The low evaporation tube effectively decreases the loss of coolant; therefore, no refill is required.

Any CPU Can Be the Right CPU

The package includes brackets for the latest Intel and AMD CPU sockets to be compatible with the most modern CPU platforms, including the latest Intel LGA1700 and AMD AM5 CPUs.

Sync with Motherboard RGB Software

Designed to synchronize with ASUS Aura Sync, GIGABYTE RGB Fusion, MSI Mystic Light Sync, and ASRock Polychrome. It supports motherboards with a 5V addressable RGB header, allowing you to control the lights directly from the software mentioned above without installing any extra lighting software or controllers. For more details, please visit ASUS, GIGABYTE, MSI, and ASRock official websites.

CTE Form Factor

Designed by Thermaltake

The focus for CTE (Centralized Thermal Efficiency) was to provide a high level of thermal performance by altering our approach to traditional case design. The result was a design that utilizes a 90-degree rotated motherboard tray to provide not only more airflow pathways but also more efficient airflow pathways.

With the new fan trays being able to accept up to three 140mm or 120mm fans as well as up to a 420mm AIO Radiator the CTE chassis provides lots of options whether you choose Air, AIO, or DIY Liquid Cooling for your build. Since the motherboard tray has been rotated, direct intake airflow from each of the motherboard trays can more efficiently be directed toward components like the CPU and GPU and then exhausted with the assistance of natural convection.

The design utilizes a 90-degree rotation of the motherboard providing more efficient airflow pathways.

Optimized Intake

The rotation of the motherboard tray not only allows the CTE design to bring the CPU and GPU closer to the intake sources but goes one step further in providing each their own dedicated intake. The CTE T500 TG ARGB supports up to three 140mm/120mm fans or up to420mm radiators on the front and an additional three 140mm/120mm fans or up to a 360mm radiator in the rear.

Central Thermal Efficiency

Now that primary heat sources have been centralized in the chassis, intake and exhaust can both benefit from shortened and optimized air pathways located at the front, top, rear and bottom.

Create and Display

Designed to meet the needs of All-in-One, custom liquid cooling as well as air cooling solutions, the CTE T500 features a 4mm Tempered Glass as well as side panels engineered for ventilation. Providing both great airflow and great views to your build inside.

Maximum Radiator Support

To keep in line with the previous CTE chassis, the T500 focuses on the front and rear mounting locations that can support up to a 420mm radiator up front and up to a 360mm radiator in the rear as well as mounting 120mm radiators at the top and bottom. Perfect for builds that want to take advantage of more than one radiator while still maintaining great airflow.

Options to Fit Your Dream Build

With features like enough space to accommodate up to 11 fans, a rotating PCI-E tray and riser bracket, removable pump and reservoir bracket, and two removable fan brackets the T500 has what it takes to fit everything you want for your dream build. Fans can be mounted on the front and rear of the chassis via a removable fan brackets, on the bottom of the chassis either on top of the HDD cover or on the direct bottom of the case, the top of the chassis both next to the rear I/O as well as the PCI-E section, and finally there is an additional fan mount behind the motherboard.

Three Pre-Installed 140mm CT140 ARGB Fans

Our new CT series ARGB fans offer great performance and beautiful LED effects and we have included 3 of the 140mm series to give you a start. With standard 4-Pin PWM and 5V ARGB connectivity set up is simple and benefits from a variety of ways to control your fan speeds and lighting effects.

Complete Your Build with CT Series Fans

Really like the look of the CT fans and want to complete your build with them, then just click on the links below. Our new CT series fans come in a variety of sizes, color options, and LED or Non-LED options to fit what came with your chassis or the look you are going for.

CTE Form Factor

Designed by Thermaltake

The focus for CTE (Centralized Thermal Efficiency) was to provide a high level of thermal performance by altering our approach to traditional case design. The result was a design that utilizes a 90-degree rotated motherboard tray to provide not only more airflow pathways but also more efficient airflow pathways.

With the new fan trays being able to accept up to three 140mm or 120mm fans as well as up to a 420mm AIO Radiator the CTE chassis provides lots of options whether you choose Air, AIO, or DIY Liquid Cooling for your build. Since the motherboard tray has been rotated, direct intake airflow from each of the motherboard trays can more efficiently be directed toward components like the CPU and GPU and then exhausted with the assistance of natural convection.

The design utilizes a 90-degree rotation of the motherboard providing more efficient airflow pathways.

Optimized Intake

The rotation of the motherboard tray not only allows the CTE design to bring the CPU and GPU closer to the intake sources but goes one step further in providing each their own dedicated intake. The CTE T500 Air supports up to three 140mm/120mm fans or up to 420mm radiators on the front and an additional three 140mm/120mm fans or up to a 360mm radiator in the rear.

Central Thermal Efficiency

Now that primary heat sources have been centralized in the chassis, intake and exhaust can both benefit from shortened and optimized air pathways located at the front, top, rear and bottom.

Create and Display

Designed to meet the needs of All-in-One, custom liquid cooling as well as air cooling solutions, the CTE T500 features a 4mm Tempered Glass as well as side panels engineered for ventilation. Providing both great airflow and great views to your build inside.

Maximum Radiator Support

To keep in line with the previous CTE chassis, the T500 focuses on the front and rear mounting locations that can support up to a 420mm radiator up front and up to a 360mm radiator in the rear as well as mounting 120mm radiators at the top and bottom. Perfect for builds that want to take advantage of more than one radiator while still maintaining great airflow.

Options to fit you Dream Build

With features like enough space to accommodate up to 11 fans, a rotating PCI-E tray and riser bracket, removable pump and reservoir bracket, and two removable fan brackets the T500 has what it takes to fit everything you want for your dream build. Fans can be mounted on the front and rear of the chassis via a removable fan brackets, on the bottom of the chassis either on top of the HDD cover or on the direct bottom of the case, the top of the chassis both next to the rear I/O as well as the PCI-E section, and finally there is an additional fan mount behind the motherboard.

Three pre-installed 140mm CT140 fans

Our new CT series fans offer great performance and we have included 3 of the 140mm series to give you a start. With standard 4-Pin PWM connectors set up is simple and benefits from a variety of ways to control your fan speeds through motherboard software.

Complete your build with CT series fans

Really like the look of the CT fans and want to complete your build with them, then just click on the links below. Our new CT series fans come in a variety of sizes, color options, and LED or Non-LED options to fit what came with your chassis or the look you are going for.

CTE Form Factor

Designed by Thermaltake

The focus for CTE (Centralized Thermal Efficiency) was to provide a high level of thermal performance by altering our approach to traditional case design. The result was a design that utilizes a 90-degree rotated motherboard tray to provide not only more airflow pathways but also more efficient airflow pathways.

With the new fan trays being able to accept up to three 140mm or 120mm fans as well as up to a 420mm AIO Radiator the CTE chassis provides lots of options whether you choose Air, AIO, or DIY Liquid Cooling for your build. Since the motherboard tray has been rotated, direct intake airflow from each of the motherboard trays can more efficiently be directed toward components like the CPU and GPU and then exhausted with the assistance of natural convection.

The design utilizes a 90-degree rotation of the motherboard providing more efficient airflow pathways.

Maximized Intake

The rotation of the motherboard tray not only allows the CTE design to bring the CPU and GPU closer to intake sources but also goes one step further in providing them each their own intake sources with space for up to three 140mm/120mm fans or a radiator up to 420mm.

Central Thermal Efficiency

Now that primary heat sources have been centralized in the chassis the additional intake located at the bottom of the case can also assist the dedicated exhaust at the top of the case in removing heat from the system. Combined with the shorter air pathways throughout the chassis the CTE line up is very good with intake and exhaust while still providing plenty of room to build in.

Create and Display Your Dream Build

Framed to fit your view, the CTE C700 TG ARGB comes with two 4mm tempered glass panels located on the front and left side of the chassis. Show off everything from full custom liquid cooling loops to fancy AIOs and fans. To make removing the tempered glass easy there is a small tab located on the upper left corner and to hold things back in place the tempered glass panel snaps back in utilizing peg hooks, which are located on the rest of the panels of chassis as well.

Maximum Radiator Support

The CTE C700 offers multiple mounting locations and plenty of room to create your own configurations. DIY radiators up to 360mm in length can be installed on the front, rear and bottom, and for AIO compatibility, up to 420mm/360mm radiators can be installed on the front and rear, giving PC enthusiasts plenty of flexibility to create their ideal setup.

Options to Fit Your Dream Build

The CTE C700 TG comes equipped with features such as enough space to accommodate up to twelve 120mm fans and eleven 140mm fans, removable fan trays and pump mounts, as well as accepting 360mm/420mm radiators at the front and rear and 360mm radiators on the bottom of the chassis.

Three Pre-Installed 140mm CT140 ARGB Fans

Our new CT series ARGB fans offer great performance and beautiful LED effects and we have included three of the 140mm series to give you a start. With standard 4-Pin PWM and 5V ARGB connectivity set up is simple and benefits from a variety of ways to control your fan speeds and lighting effects.

CTE Form Factor

Designed by Thermaltake

The focus for CTE (Centralized Thermal Efficiency) was to provide a high level of thermal performance by altering our approach to traditional case design. The result was a design that utilizes a 90-degree rotated motherboard tray to provide not only more airflow pathways but also more efficient airflow pathways.

With the new fan trays being able to accept up to three 140mm or 120mm fans as well as up to a 420mm AIO Radiator the CTE chassis provides lots of options whether you choose Air, AIO, or DIY Liquid Cooling for your build. Since the motherboard tray has been rotated, direct intake airflow from each of the motherboard trays can more efficiently be directed toward components like the CPU and GPU and then exhausted with the assistance of natural convection.

The design utilizes a 90-degree rotation of the motherboard providing more efficient airflow pathways.

Optimized Intake

The rotation of the motherboard tray not only allows the CTE design to bring the CPU and GPU closer to the intake sources but goes one step further in providing each their own dedicated intake. The CTE T500 Air supports up to three 140mm/120mm fans or up to 420mm radiators on the front and an additional three 140mm/120mm fans or up to a 360mm radiator in the rear.

Central Thermal Efficiency

Now that primary heat sources have been centralized in the chassis, intake and exhaust can both benefit from shortened and optimized air pathways located at the front, top, rear and bottom.

Create and Display

Designed to meet the needs of All-in-One, custom liquid cooling as well as air cooling solutions, the CTE T500 features a 4mm Tempered Glass as well as side panels engineered for ventilation. Providing both great airflow and great views to your build inside.

Maximum Radiator Support

To keep in line with the previous CTE chassis, the T500 focuses on the front and rear mounting locations that can support up to a 420mm radiator up front and up to a 360mm radiator in the rear as well as mounting 120mm radiators at the top and bottom. Perfect for builds that want to take advantage of more than one radiator while still maintaining great airflow.

Options to fit you Dream Build

With features like enough space to accommodate up to 11 fans, a rotating PCI-E tray and riser bracket, removable pump and reservoir bracket, and two removable fan brackets the T500 has what it takes to fit everything you want for your dream build. Fans can be mounted on the front and rear of the chassis via a removable fan brackets, on the bottom of the chassis either on top of the HDD cover or on the direct bottom of the case, the top of the chassis both next to the rear I/O as well as the PCI-E section, and finally there is an additional fan mount behind the motherboard.

More from the Manufacturer

Quick Connect with Magnetic Force Design

Our magnetic force design ARGB version enables the connection of both the 12V PWM cable and the 5V ARGB lighting cable to a single magnetic connector; simply placing the fans side by side, the magnet connectors will instantly draw the fan frames together while keeping them in place, thus powering and lighting up the fans by daisy-chaining them. This design keeps the assembly process simple while reducing installation time, making this fan more user-friendly and bringing extra fun while building your PC.

Say Goodbye to Excessive Cables

Connect your fans with SWAFAN EX's Magnetic Force Quick Connect Design and be free from messy cables!

The Ultimate Cooling Performance of an RGB Fan

The design guarantees optimal cooling performance under different conditions, like installing fans on thick radiators or air coolers or even a chassis with multiple filters that are difficult to have air naturally pass through.

Standard Fan Blades has an air pressure of 3.17 mmH2O (Max) and airflow of 81.6 CFM (Max), and can bring air from front to the back.

The fan blades guarantee optimal cooling performance under different conditions, like installing the fans on thick radiators, air coolers, or even a chassis with multiple filters; they can still provide you with the best cooling result possible.

Reverse Fan Blades has an air pressure of 2.73 mmH2O (Max) and airflow of 79.3 CFM (Max), and can bring air from back to the front.

Cleaning Fans are now Easy and Fun! | Pop and insert, it is that easy.

If you want, you can even rinse the fan blades with water, just make sure you dry them thoroughly and apply the bearing lubricant that is included in the package if needed.

Don't Turn Your Back on Lighting Ever Again!

No more sacrificing aesthetics for your airflow direction; SWAFAN EX can now do both!

Great Lighting Effects with 16.8M Colors

Two independent LED rings with 20 LEDs (Inner ring: 6, Outer ring: 14) allows you to explore different build themes with 5V motherboard sync lighting software.

Sync with Motherboard RGB Software

Designed to synchronize with ASUS Aura Sync, GIGABYTE RGB Fusion, MSI Mystic Light Sync, and ASRock Polychrome. It supports motherboards with a 5V addressable RGB header, allowing you to control the lights directly from the software mentioned above without installing any extra lighting software or controllers. For more details, please visit ASUS, GIGABYTE, MSI, and ASRock official websites.

Quick Connect with Magnetic Force Design

Our magnetic force design ARGB version enables the connection of both the 12V PWM cable and the 5V ARGB lighting cable to a single magnetic connector; simply placing the fans side by side, the magnet connectors will instantly draw the fan frames together while keeping them in place, thus powering and lighting up the fans by daisy-chaining them. This design keeps the assembly process simple while reducing installation time, making this fan more user-friendly and bringing extra fun while building your PC.

Say Goodbye to Excessive Cables

Connect your fans with SWAFAN EX's Magnetic Force Quick Connect Design and be free from messy cables!

Swap the Fan Blades as You Like

Simply pop out the fan blades,switch up the blades and press them back in!

The Ultimate Cooling Performance of an RGB Fan

The design guarantees optimal cooling performance under different conditions, like installing fans on thick radiators or air coolers or even a chassis with multiple filters that are difficult to have air naturally pass through.

Cleaning Fans are now Easy and Fun! | Pop and insert, it is that easy.

If you want, you can even rinse the fan blades with water, just make sure you dry them thoroughly and apply the bearing lubricant that is included in the package if needed.

The fully modular Toughpower GF1 series is available in 750W / 850W models and built to deliver 80 PLUS Gold efficiency. With an ample 10-year warranty, the Toughpower GF1 is able to satisfy the market, where PC enthusiasts are looking for a premium power supply with all the latest features.

Compact Design with 140mm Depth

The Toughower GF1 Series is designed to be compact with a size of 140mm (D) x 86mm (H) x 150mm (L) providing ample space for cable management.

Zero Cable Platform

Farewell to messy cables! We have connected the back panel and the PCB with a copper plate for better heat dissipation and impressive output power quality.

Be Smart, Stay Quiet

Featuring a 120mm fluid bearing fan to deliver excellent airflow. Furthermore, the Smart Zero Fan will not spin until the load exceeds certain percentage of the power supply, minimizing undesired noise.

Fully Modular Low-Profile Flat Cable

Offers cable selection for users while powering the system at an advantageous voltage. Low-profile flat black cable makes cable management easier, reduces clutter and increases airflow inside the chassis.

High Quality 105°C/221°F Main Capacitors

Providing great durability as well as offering the highest stability, while remaining reliable.

High Amperage Single +12V Rail & High-Class Technologies

Powerful single +12V rail can properly deliver the power you need for the best compatibility. The use of LLC and DC to DC circuit design provides very stable operation.

80 PLUS Gold Certified and Intel C6/C7 States Ready

Toughpower GF1 series saves energy through its high energy efficiency up to 90% and is certified to 80 PLUS® Gold. The series has been optimized to work with all generations of Intel's processors to achieve maximum energy saving.

Built-in Industrial Grade Protection

To protect the hardware, Toughpower GF1 series is built with industry grade protections: OCP(Over Current Protection), OVP (Over Voltage Protection), UVP(Under Voltage Protection), OPP(Over Power Protection), SCP(Short Circuit Protection), OTP(Over Temperature Protection).

More from the Manufacturer

ATX 3.0 & PCIe Gen 5.0 Ready | Power Up the Next Generation Hardware

To fully support next-gen hardware, Toughpower GF A3 Snow Series (850W/1050W) is designed to meet ATX 3.0 standards, including a PCIe Gen 5.0 12VHPWR connector. The GF A3 Gold series delivers 80 PLUS Gold efficiency, it also offers stability, durability, and reliability. For users who crave for a pure white build, this power supply can definitely meet their demands.

Fully Compatible with Intel ATX 3.0 Standards

Toughpower GF A3 Snow Gold series is fully compatible with Intel ATX 3.0 Specifications which supports up to 200% power excursion, reaches 60% low load efficiency and complies with required power supply timing standards.

PCIe Gen 5.0 Ready

Toughpower GF A3 Snow series comes with a 12+4pin connector to offer powerful and stable performance allowing the PSU to natively run next-generation GPUs.

The wattage marked on the 12VHPWR's connector is the recommended wattage. (Ref. Intel design guideline) The native 12+4pin (12VHPWR) PCIe connector of the GF A3 Snow 850W can deliver up to 450W for PCIe 5.0 graphics cards.

Made to Comply with the Latest Graphics Cards

As the power consumption of graphics cards increase, so has their demand for power. The GF A3 Snow series is designed to support NVIDIA and AMD graphics cards, it supports 8-pin PCIe cables for AMD graphics cards & entry RTX 40 series graphics cards, it also comes with a 1 x 12+4pin connector for RTX 40 series cards that need a PCIe Gen 5.0 connector. The GF A3 Snow series ready to supply the graphics cards according to their different ways of connections.

Be Smart, Stay Quiet

Features a 120mm fluid bearing fan to deliver excellent airflow. Furthermore, the Smart Zero Fan will the fan will not spin until the load exceeds 30% of the power supply, minimizing undesired noise.

High Quality Japanese Main Electrolytic Capacitor

High quality Japanese main electrolytic capacitor greatly improves the power supplies durability and ensures the Toughpower GF A3 Snow series is stability and reliability.

High Amperage Single +12V Rail & High-Class Technologies

Powerful single +12V rail can properly deliver the power you need for the best compatibility. The use of LLC and DC to DC circuit design provides very stable operation and enhanced voltage regulation.

Fully Modular Low-Profile Cables

Offers cable selection for users while powering the system at an advantageous voltage. Low-profile white cables make cable management easier, reduces clutter and increases airflow inside the chassis.

Built-in industrial grade protection

To protect the hardware, the GF A3 Snow is built with industry grade protections: OCP(Over Current Protection), OVP (Over Voltage Protection), UVP(Under Voltage Protection), OPP(Over Power Protection), SCP(Short Circuit Protection), OTP(Over Temperature Protection).

80 PLUS Gold Certified and Lake C6/C7 States Ready

Toughpower GF A3 Snow Gold series saves energy through its high energy efficiency up to 90% and is certified to 80 PLUS® Gold. It has been optimized to work with all generations of Intel's processors to achieve maximum energy savings.