HOT SWAP DRIVE MODULE | HD01X

Additional hard drive cage that can support 2 hot swap HDDs or SSDs.

COMPATIBLE WITH V3000 PLUS/ O11D EVO/ O11D

With simple installation process, the hot swap drive module can be installed on the main chamber of V3000 Plus (4 sets maximum), the 2nd chamber of O11D EVO and O11D.

EASILY ACCESSIBLE

Include SATA and data transfer cables, the drive cage allows to remove and replace the hard drives without unplugging any cable.

Upright GPU Bracket for 40 Series GPU

Mount large graphics cards in a unique way for better cooling performance with the upright GPU bracket.

THE LEGEND RETURNS

V3000 PLUS, the legend's continuation, is an eye-catching full tower chassis. Designed for enthusiasts, the V3000 PLUS offers a great building process and improved thermal control.

• Full Aluminum Exterior
• Exterior Mesh Panel for best possible airflow 
• Front ARGB Lighting 
• Projected LIAN LI Logo
• Push-pull Hinged Glass Panels
• Toolless SSD Mounting
• Dual Side Tinted Tempered Glass Panel
• Rotatable PSU Bracket for thicker bottom radiator

V3000 PLUS is designed with flexibility and possibilities in mind. Thanks to a removable motherboard tray and an adaptable PSU shroud compartment, the V3000 PLUS can be set in Mode 1 as a standard build, Mode 2 for a rotated motherboard with a unique look, or Mode 3, as a dual system.

A spacious case for housing large components.

Upright GPU Bracket for 40 Series GPU

Mount large graphics cards in a unique way for better cooling performance with the upright GPU bracket.

AVAILABLE AS UPGRADE KIT

Users who own the original upright GPU bracket (O11DE-2/ O11DE-6) can purchase the add-on supplemental kit to ideally hold the longer and thicker 40 series GPU at the upright position.

OPTIMIZED FOR DIRECT COOLING

The GPU standing upright next to the motherboard creates a chimney-style airflow, moreover the ability to mount intake fans behind the GPU effectively controls the GPU temperature.

SIMPLE INSTALLATION

The new upright GPU kit mounts directly to the side fan bracket, which makes the installation easier and slightly shifts the GPU position to prevent the upright GPUs from interfering with top/bottom mounted fans/radiators.

A4-H20

A TRIBUTE TO SFF

The A4-H2O is an 11-liter small form factor case, a collaboration project with DAN Cases. Based on the original DAN A4-SFX case sandwich layout concept, the A4-H2O continues the minimalist and compact form factor with improved hardware compatibility (including AIO water cooling) and simplifies installation.

11-Liter Form Factor

At only 11 liters, the A4-H2O is one of the smallest cases on the market that supports triple-slot GPU and clearance for 240 AIO water cooling.

SIZE COMPARISION

The A4-H20 is smaller in size than most consoles, and the minimalist design suits any living space or any entertainment center to enjoy games or movies.

Minimalist Design - Black or Silver

A minimalist design, the A4-H2O has premium aluminum exterior with ventilation from almost most sides. The A4-H2O is available in black or silver.

For Living Space

Minimalist black or silver design of the A4-H20 feels right at home in any living space. The small 11-liter volume is small enough to feel like it's not even there.

For Desktop

Small footprint of the A4-H20 fits on any desktop without taking up too much space for you to keep your space clean and spacious to game or work.

Sandwich Layout Design

The sandwich layout allows for a triple-slot GPU to fit into the compact size case. Matched with a PCIe Gen. 3 or Gen. 4 riser cable, the GPU is located behind the motherboard and leaves room for a 240mm radiator at the top of the case. Bottom, side, and top mesh panels ensure that the components get cooled directly with fresh air intake.

Easy AIO Installation

A removable bracket at the top makes the installation of radiators up to 240mm in length much easier. The top compartment accommodates a fan radiator combo of up to 55mm in thickness.

Supports SFX, SFX-L Power Supply

A removable mounting bracket is designed to support SFX and SFX-L power supplies. A power cord extension is also included and pre-routed to avoid interfering with other hardware.

Fully Removable Panels

Front, side, top and bottom panels can all be removed easily to provide easier access for installation and/or cable management.

Well Ventilated

Aside from the front panel, the top, sides and back of the A4-H2O are well ventilated with fine mesh which allows fresh air intake to enter the case.

PCIe-3.0 and PCIe 4.0

The A4-H2O includes a PCIe Gen.3 or PCIe Gen. 4 riser cable, to vertically mount the GPU and place it behind the motherboard. The PCIe 4.0 riser cable supports transfer rate of 16GT/s (double the speed of PCIe 3.0). PCIe Gen.4 riser cables are backwards compatible with PCIe Gen 3.

IO and Power

Located on the left side of the case inside a recessed cutout, the front IO includes a USB 3.1 Type-C (internal Key-A) port, a Mic port, an HD-Audio port, and a USB 3.0 Type-A port (internal 19pin). At the top of the recess is a premium-grade power button.

Triple-slot GPU Compatible

Removing the front panel provides a wide opening at the front to insert larger graphics card into the case with ease. The spacious interior supports a triple-slot graphics card of up to 322mm.

Optimized airflow for 2 slots GPUs

The extra standoffs helps pushing a two slot GPU toward the side panel in order to exhaust or intake fresh air directly out of the chassis.

Removable Bottom Panel - Cable Management & Storage

The removable bottom panel provides additional access to the inside of the case and makes for easier cable management. A 2.5" SSD drive can also be attached onto the bottom panel.

LANCOOL 216

AIRFLOW FOCUS

The LANCOOL 216 is a mainstream case that features all-around mesh panels for optimal airflow. Thanks to its modular rear panel, it can be optimized for air cooling or water cooling. It includes 2 x 160mm and 1 x 140mm pre-installed PWM fans and an innovative rear PCIe fan bracket to maximize airflow.

AVAILABLE IN TWO COLORS

WHITE RGB / BLACK RGB / BLACK

CONTINUOU FRONT TO TOP MESH

To ensure adequate airflow is provided to the system, the LANCOOL 216 features mesh at the front, top, and on the PSU shroud's side*. The front mesh extends to the top for a continuous mesh panel.

LANCOOL 216 RGB FANS

The included 160mm ARGB fans feature two channels of LEDs (one on the outer rim of the fan, another at the shaft of the fan blades) that can be controlled separately via an optional accessory, or via the motherboard lighting software by connecting them directly to a motherboard 5V 3pin header.

Located in the second chamber behind the motherboard, a SATA-powered fan hub can support up to 4x ARGB and PWM fans.

AIR COOLING MODE / WATER COOLING MODE

The modular motherboard I/O allow users to move the motherboard to a higher position which is more favorable for air-cooled systems, or a lower position for water-cooled systems.

AIR COOLING

Set higher, the motherboard leaves room above the PSU shroud for wider fans.

WATER COOLING

Set lower, the motherboard leaves a 63mm thick gap at the top to install radiator/fan combos, ideal for AIOs or custom water cooling.

FRONT I/O CAN BE RELOCATED

Including a power button, reset button, audio port, 2x USB3.0 ports, and a USB Type C port, the front I/O module can be relocated to the lower left side of the front panel.

HARDWARE COMPATIBILITY

The LANCOOL 216 supports ATX, Micro-ATX, MINI-ITX motherboards, and E-ATX under 280mm in width (when the grommet bar is flipped 180°). In addition, thanks to its symmetrical design, cable management in the 2nd chamber remains unaffected.

LATEST GEN. GPU READY

With enough room for graphics cards up to 392mm in length, and 180mm in height (for air cooling mode), the LANCOOL 216 is compatible with even the largest NVIDIA 4000 series cards.

PRESSURE LEAK FREE

Pre-installed at the front of the top radiator bracket, a seal plate ensures no pressure leak is created when installing smaller than a 360 radiator/3x120mm fans at the top.

REMOVEABLE TOP RADIATOR BRACKET

The top mounting bracket can be completely removed from the case for easier hardware installation. The bracket comes off with the left side frame bar to provide optimal clearance.

Two grooves have been implemented to allow easy passage of fan cables into the second chamber of the case, simplifying cable management and making the overall look of the build better.

PCIE FAN BRACKET

The GPU placed at the top of the expansion slots in air cooling mode opens up the possibility to add a 120mm fan at the rear of the case without obstructing the GPU I/O. This is also possible with a vertically mounted GPU in both air-cooled and water-cooled mode. The additional 120mm fan provides better cooling for the GPU and a greater intake/exhaust balance for the system.

VERTICAL GPU COMPATIBLE

The PCIe expansion slot panel can be rotated to vertically install the GPUs, only an additional riser cable is required.

STORAGE

UP TO 6 x SSD + 2 X HDD STORAGE CAPACITY

A total of 2 x 3.5" + 6 x 2.5" drives can be installed with dedicated mounts for storage.