Lantronix SLC 8000 Single 100 to 240 VAC Power Supply Module
Lantronix SLC 8000 Single 100 to 240 VAC Power Supply Module
The Lantronix® SLC 8000 Power Supply Module enables system and network administrators to easily upgrade or switch their SLC 8000 unit's inlet supply configuration without the hassle of disconnecting all of its attached equipment and replacing the entire console server which disrupts the entire system and workflow. Once installed, the power supply module is automatically detected by the SLC 8000.
- On/off rocker switch for easy power cycling of SLC 8000
- Allows easy and quick power supply replacements for SLC 8000
- Enables easy customization of SLC 8000 power supply configurations
- Reduces time and cost required to develop and deploy IT services
- Enables balanced CAPEX and OPEX management
- Field-replaceable and field-upgradable
Lantronix SLC 8000 56K V.92 Internal Modem
The Lantronix® SLC 8000 56K V.92 Internal Modem enables system and network administrators to add a dial-up out-of-band connection to the SLC 8000 to leverage the facility's reliable POTS line in case a secondary access path is required if there is a network failure. The internal modem is easily installed and automatically detected by the SLC 8000.
- Enables out-of-band dial-up connectivity for SLC 8000
- Allows easy and quick modem replacements for SLC 8000
- Maximum data rate: 56,000 bps ~ V.92
- Automatic format/speed sensing
- Enhanced AT command set
- Concurrent DTMF detection/generation
- 26 AWG phone cord (7 ft) included
- Quick and simple installation
- Easily field-replaceable
Lantronix SLC 8000 Dual 100 to 240 VAC Power Supply Module
Lantronix SLC 8000 Dual 100 to 240 VAC Power Supply Module
The Lantronix® SLC 8000 Power Supply Module enables system and network administrators to easily upgrade or switch their SLC 8000 unit's inlet supply configuration without the hassle of disconnecting all of its attached equipment and replacing the entire console server which disrupts the entire system and workflow. Once installed, the power supply module is automatically detected by the SLC 8000.
- Dual AC inlets allow for power redundancy and automatic failover
- Automatic power source switchover feature monitors both AC inputs and transfers power to secondary power source if primary power is lost
- Allows easy and quick power supply replacements for SLC 8000
- Enables easy customization of SLC 8000 power supply configurations
- Reduces time and cost required to develop and deploy IT services
- Enables balanced CAPEX and OPEX management
- Field-replaceable and field-upgradable
Lantronix SLC 8000 Dual 100 to 240 VAC Power Supply Module
Lantronix SLC 8000 Dual 100 to 240 VAC Power Supply Module
The Lantronix® SLC 8000 Power Supply Module enables system and network administrators to easily upgrade or switch their SLC 8000 unit's inlet supply configuration without the hassle of disconnecting all of its attached equipment and replacing the entire console server which disrupts the entire system and workflow. Once installed, the power supply module is automatically detected by the SLC 8000.
- Dual AC inlets allow for power redundancy and automatic failover
- Automatic power source switchover feature monitors both AC inputs and transfers power to secondary power source if primary power is lost
- Allows easy and quick power supply replacements for SLC 8000
- Enables easy customization of SLC 8000 power supply configurations
- Reduces time and cost required to develop and deploy IT services
- Enables balanced CAPEX and OPEX management
- Field-replaceable and field-upgradable
Lantronix Network Cable, 6' RJ45 to DB9 Male Cable, Connect to DCE Device
Lantronix One Port Serial (RS232/ RS422/ RS485) to IP Ethernet Device Server with Power Over Ethernet (PoE)
The UDS1100 Device Server with PoE enables users to connect, manage and control just about any piece of equipment with a serial port from virtually anywhere over Ethernet or the Internet.With the UDS1100, virtually any piece of equipment can be added to an Ethernet network in a matter of minutes! This single-port device server is a quick, simple and inexpensive way to bring the advantages of remote management to equipment not currently connected to a network.
Lantronix SecureBox SDS1101 Single-Port Secure Device Server, AES Encrypt, universal PS, DB25F DCE serial port, RJ45
The SecureBox SDS1101 offers the most secure way to add formerly isolated electronic equipment to the Ethernet network. With this capability, virtually any device with a serial port can be remotely accessed and controlled securely over the network or the Internet. This adds an unprecedented level of flexibility and efficiency to your business, and breathes new life into your existing equipment.
SLS200, 1 Port Remote KVM-over-IP with PS/2 and USB Connectors; 58" VGA cable
SecureLinx Spider provides secure KVM (keyboard, video, mouse) server management over an IP network. Unlike any other product on the market, Spider offers a flexible, scalable and affordable CAT5-based remote access KVM solution in a cable friendly, compact "zero-footprint" package. Spider is ideal for remotely managing geographically distributed IT equipment. It eliminates server-to-switch CAT5 cable distance limitations and gives system administrators 24/7 access to mission critical servers distributed across a wide variety of network environments such as high-density data centers, corporate or university campuses, multi-floor buildings, branch offices, and test and development labs.
Lantronix Network Cable Assembly, 6' RJ45 M to DB25 Female cable to DTE Device
