For telephone craft work. Connect wires to fuses and tighten nuts on binding post terminals. Place fuses in cable terminals. Double ended 0.37" and 0.43" hex sockets are color coded for quick identification of socket sizes. Design allows use of a wrench for additional torque.

Platinum Tools 8-in-1 Ratcheted Stubby Screwdriver is the perfect tool for those cramped spaces. Features a 6 piece bit storage unit conveniently built directly into the handle, simply unscrew the top cap and swap bits out as needed. Also features a full ratcheting mechanism and a non-slip rubberized grip for quick tightening and loosening of screws with minimal effort.

This high quality crimp tool is designed to quickly crimp and cut the wires of the EZ-RJ45 connector in one easy simple operation! The ratcheted straight action crimping motion ensures a uniform crimp every cycle. Features precision cast crimping dies for superior accuracy. Built in wire cutter and stripper for silver satin. All steel frame with rust resistant black oxide finish.

Stop Punching - Platinum's new Keystone Couplers terminate in half the time of standard keystones!

How often are loose connections in punchdown keystones the cause of install delays or service callbacks? Eliminate this potential trouble spot with our new Keystone Couplers. Simply terminate the cable with the Platinum RJ45 connector of your choice, plug it into the back of the Keystone Coupler, then snap the Coupler into a wall plate or surface mount box. For even more customization, combine with our unloaded patch panels for fast wiring and total flexibility.

• Terminates in 1/2 the time of punchdown keystones
• No compromise in data throughput speeds
• Fast, easy, F to F connection using RJ45 connectors
• Standard keystone size works with most wall plates, surface-mount boxes, and unloaded patch panels

Organize your cables and protect RJ45 plugs with snagless Cat5e, Cat6 and Cat6A boots.

• Protect the connector
• Prevent tangled messes
• Eliminate broken release/locking tabs
• Relieve stress on cable
• Help maintain radius bend
• Color code designated
• Cover the external ground on shielded connectors
• Max Cable OD: From 0.217 to 0.344 inches
• Manufactured from PVC material

Organize your cables and protect RJ45 plugs with snagless Cat5e, Cat6 and Cat6A boots.

• Protect the connector
• Prevent tangled messes
• Eliminate broken release/locking tabs
• Relieve stress on cable
• Help maintain radius bend
• Color code designated
• Cover the external ground on shielded connectors
• Max Cable OD: From 0.217 to 0.344 inches
• Manufactured from PVC material

The PT Punchdown Tool is an excellent addition to any datacom or telecom installers arsenal. Terminate efficiently and precisely every time. The PT Punchdown Tool combines the classic punchdown tool design with essential extras to create a competitively priced high quality solution. Whether using 110, 66, 630, Krone or BIX style cross connectors the PT punchdown tool covers all the bases and ensures installs are streamlined and effective every time.

• Terminate and cut Cat3/5/5e/6 cables
• Spring loaded for fast, low effort wire seating and termination
• Bayonet style (twist & lock) blade retention socket is compatible with industry standard tools and blades
• 110, 66, 630, Krone and BIX™ style interchangeable blades
• Built-in hook - feeds or removes wire
• Built-in spudger - for screwdriver, IDC insert tool or to clean debris
• Adjustable Hi-Lo force impact settings are precisely controlled to meet the industry standard 8762D spec
• Large blade storage compartment

Perform 360° crimps on the external ground tab of shielded RJ45 connectors. Tool design allows the installer to perform a concentric termination with full control, preventing over/under crimping the external ground tab.

Replacement blade specifically for the EXO-EX Die™. A sharp blade assures your tool will neatly trim the wire from the ends of the connectors for crisp, clean crimps every time. Always have a spare on hand.

• Replacing blade improves the prefomance of your termination
• Compatible with EXO-EX Die™ only
• Qty 2

J-Hook, High-Performance Hybrid, 1" (16), White - 25pcs

• High-performance hybrid J-Hook
• Wide design reduces cable sag and signal degradation and loss
• Built-in retainer strap eliminates cable and Velco® ties
• Smooth plastic for easy cable pulling and sliding
• White plastic
• J-Hook only (does not include mounting clips, brackets or magnets)
• 1" (size 16)
• 25 pieces per package
• Plenum rated
• 50lb static load rating
• RoHS and TIA compliant
• cULus listed - complies with 2043
• Light-weight

The High Performance J-Hooks are built with steel J-Hooks over-molded with polypropylene for an easy cable slide. The "Snap-Lock" Retainer is easy to use and re-use, firmly securing cables every time and eliminating the use of cable and Velcro ties. Each J-hook has a 2" wide base support, to prevent cable kinks. They're cULus listed, Plenum rated, RoHS compliant, and are available in 1", 2", 3", and 4" sizes, along with a variety of hardware accessories for all of your cable management needs.

• Wide base support - 2"
• Snap-Lock Retainer firmly secures cables
• Eliminates the use of Cable Ties/Velcro Ties
• Made with an easy slide, slick, burr free surface
• Light-weight
• Flush Mount
• cULus Listed - Complies with 2043
• Plenum Rated
• RoHS & TIA Compliant
• Includes: 90 Degree Angled hardware
• Ultimate static load is 50 lbs for each size

Works with virtually all common fiber optic sizes and connector types, allowing you to test cables prior to install and test patch & breakout cables for faults. Powerful 10mW laser makes faults easy to see. Convenient flip-cap protects the laser tip, and with included adaptor works with most common sizes and types of fiber connectors.

• Bright 10mW laser for continuity testing, also shows breaks and performance-reducing bends in most types of fiber optic cable
• Aluminum construction for lightweight and durability
• Simple slide switch to select either a flashing or solid beam
• Hinged flip cap protects the lens when not in use
• Works with both 1.25 & 2.5mm ferrules
• Runs for more than 20 hours on 2 AA batteries (included).

Hang ceiling wire & jack chain, threaded rod and eye lag screws. Our hardware is designed for the most efficient, secure and cost effective hanging hardware solutions.

• E-Z installation to beam flanges up to 1/2
• Supports 1/4
• Accommodates standard 1/4-20 or #10-24 threaded bridle rings