Link a remote terminal to a host computer: Connect multiple devices, such as security scanners, POS devices, remote terminals and building access/alarming systems to a host computer.
Transition Networks' serial RS232 to fiber converters allow you to extend the distance between serial connections with the use of fiber optic cable. These full-featured converters transmit the full complement of RS232 flow control/handshaking signals optically and supports full or half-duplex asynchronous data transmission at speeds up to 115 Kbps.
The diagnostic features included on these converters make installation easy and intuitive. A DTE/DCE switch eliminates the frustration over selecting the appropriate cable. A Loopback switch allows for complete diagnostic testing prior to system turn-up or during troubleshooting. Unit and Port LEDs allow for quick status information of the device.
General Information | |
Manufacturer | Lantronix, Inc |
Manufacturer Part Number | CRS2F3111100 |
Manufacturer Website Address | http://www.lantronix.com |
Brand Name | Transition Networks |
Product Line | Point System |
Product Series | CRS2F |
Product Model | CRS2F3111-100 |
Product Name | Point System RS232 Remotely Managed Media Converter Module |
Product Type | Transceiver/Media Converter |
Interfaces/Ports | |
Total Number of Ports | 2 |
Number of ST Ports | 1 |
ST Port Type | Duplex |
Media & Performance | |
Media Type Supported | Optical Fiber |
Fiber Mode Supported | Multi-mode |
Fiber Optic Wavelength | 1300 nm |
Maximum Data Transfer Rate | 115 kbit/s |
Maximum Distance Supported | 1.24 Mile |
Power Description | |
Power Consumption | 5 W |
Physical Characteristics | |
Form Factor | Internal |
Height | 3.4" |
Width | 0.9" |
Depth | 5" |
Weight (Approximate) | 1 lb |
Warranty | |
Limited Warranty | Lifetime |